Latest revision as of 12:00, 7 June 2024

Abstract

Load cells are used to measure tension (kN, tonne-force) in ground anchors and tendons in pre- or post-tensioned structures. Before installing and commissioning, it is strictly necessary to know the characteristics of the anchors to control as well as the installation and service scenery. Although it may look a simple assignment, there are several issues before supplying and installing a load cell: geometry of the anchor head, measurement range, expected precision, type of output signal and data transmission, temperature variations in the structure, and foreseen service life. The sort of tensioning jack and load steps are additional, unavoidable points to consider. By installing a load cell on a tieback, this is transformed into a measurement element, helping to understand the performance of the anchor as well as that of the surrounding area, medium- and long-term. To ensure load cells’ values are correct, we must take extra care with installation. Otherwise, the outcome will be flawed, and it will lead to erroneous conclusions and actions, with the subsequent increase in risk and money loss. In this paper, we share our experience regarding design, installation, and follow-up of load cells as elements to monitor the behaviour of anchored and post-tensioned structures and their area of influence

Full Paper