m (JSanchez moved page Draft Sanchez Pinedo 362673527 to Raventos* 2024a) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
International standards for monitoring under ISO have been under development since 2010 and the intentions were presented during the 8th International Symposium on Field Monitoring in Geomechanics (FMGM 2011) in Berlin. Progress on this project was reported at FMGM 2015 in Sydney and ISFMG 2022 in London. The base standard on general rules was published in 2015, part 2, the standard on extensometers, in 2016 and in 2017 the third part on inclinometers. Part 4 on piezometers was published in 2020, Part 5 on pressure cells in 2019 and Part 8 on load cells in 2023. These standards have been published as ISO Standards in English and French worldwide. In Europe the standards have been published under EN ISO 18674 member countries of CEN have to publish these standards in their country. The standards on settlement measurements by hydraulic systems (part 6), geodetic measurements (part 9) and strain measurement (part 7) are under development and will be submitted to enquiry in the next few months. | International standards for monitoring under ISO have been under development since 2010 and the intentions were presented during the 8th International Symposium on Field Monitoring in Geomechanics (FMGM 2011) in Berlin. Progress on this project was reported at FMGM 2015 in Sydney and ISFMG 2022 in London. The base standard on general rules was published in 2015, part 2, the standard on extensometers, in 2016 and in 2017 the third part on inclinometers. Part 4 on piezometers was published in 2020, Part 5 on pressure cells in 2019 and Part 8 on load cells in 2023. These standards have been published as ISO Standards in English and French worldwide. In Europe the standards have been published under EN ISO 18674 member countries of CEN have to publish these standards in their country. The standards on settlement measurements by hydraulic systems (part 6), geodetic measurements (part 9) and strain measurement (part 7) are under development and will be submitted to enquiry in the next few months. | ||
| + | |||
| + | == Full Paper == | ||
| + | <pdf>Media:Draft_Sanchez Pinedo_3626735272.pdf</pdf> | ||
Latest revision as of 11:59, 7 June 2024
Abstract
International standards for monitoring under ISO have been under development since 2010 and the intentions were presented during the 8th International Symposium on Field Monitoring in Geomechanics (FMGM 2011) in Berlin. Progress on this project was reported at FMGM 2015 in Sydney and ISFMG 2022 in London. The base standard on general rules was published in 2015, part 2, the standard on extensometers, in 2016 and in 2017 the third part on inclinometers. Part 4 on piezometers was published in 2020, Part 5 on pressure cells in 2019 and Part 8 on load cells in 2023. These standards have been published as ISO Standards in English and French worldwide. In Europe the standards have been published under EN ISO 18674 member countries of CEN have to publish these standards in their country. The standards on settlement measurements by hydraulic systems (part 6), geodetic measurements (part 9) and strain measurement (part 7) are under development and will be submitted to enquiry in the next few months.
Full Paper
Document information
Published on 07/06/24
Submitted on 07/06/24
Volume Field monitoring in geomechanics, 2024
DOI: 10.23967/isc.2024.002
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?