Revision as of 13:53, 6 June 2024

Abstract

Hydropower plays an important role in the context of the energy transition contributing to the reduction of the CO2 emission through a permanent power production as run-of-river scheme as well as for energy storage as pump-storagescheme. Nowadays large hydropower plant designs comprise tunnel, cavern and shaft excavation work known as head race and pressure tunnel or pressure shaft. The powerhouse is often placed within a large underground cavern. The results of a ground investigation phase including the determination of in-situ parameters derived from tests in boreholes drilled from the surface are crucial for a preliminary design of the hydropower plant. Additional in-situ measurements are frequently carried out within an exploratory tunnel to confirm the first predictions and to characterize in detail the mechanical and hydraulic properties of the rock mass. Solexperts portfolio of in-situ well tests comprise the assessment of hydraulic properties vs. depth through hydraulic testing of isolated borehole sections along the borehole axes, the determination of geomechanical parameters like deformation- and Young’s modules through borehole dilatometer tests and rock stress measurements conducting hydraulic mini-frac tests. Plate load tests which use surficial loading are performed in small tunnels or test adits to measure the deformation characteristics of a rock mass on a larger scale.

Full Paper