Revision as of 11:57, 6 June 2024

Abstract

This paper presents an investigation of the effects of the properties of reconstituted granular soils on the relationship between CPT cone resistance (qc) and friction angle. The results from a large number of calibration chamber tests conducted at a number of stress levels involving soils with varying shapes, compressibility and mineralogy are presented. The paper also provides data recorded in a parallel series of investigations into the mechanical properties of the granular soils employed in the chamber tests. It is shown that the nature of granular deposits has a strong influence on the relationship between qc and relative density, and that there is a near linear relationship between the cone resistance and the critical state friction angle for sands reconstituted at a given density and stress level.