| Line 1: | Line 1: | ||
| + | <!-- metadata commented in wiki content | ||
| − | |||
| − | |||
| − | + | <div id="_Hlk142570596" class="center" style="width: auto; margin-left: auto; margin-right: auto;"> | |
| + | <big>'''Microstructure effect analysis of carbon black-filled rubber composites'''</big></div> | ||
| − | 2 | + | <div class="center" style="width: auto; margin-left: auto; margin-right: auto;"> |
| + | Lihong Huang<sup>1,2</sup>, Xin Tao<sup>2</sup>, Tieping Wei<sup>1,2</sup>,, Zhifeng Li<sup>2</sup></div> | ||
| − | + | <div class="center" style="width: auto; margin-left: auto; margin-right: auto;"> | |
| + | 1. Fujian Key Laboratory of Intelligent Machining Technology and Equipment, Fujian University of Technology, Fuzhou 350118, China.</div> | ||
| + | <div class="center" style="width: auto; margin-left: auto; margin-right: auto;"> | ||
| + | 2. School of Mechanical and Automotive Engineering, Fujian University of Technology, Fuzhou 350118, China.</div> | ||
| + | |||
| + | '''Corresponding author:''' Lihong Huang | ||
'''E-mail address: 183132514@qq.com''' | '''E-mail address: 183132514@qq.com''' | ||
| + | |||
'''Abstract:''' The unidirectional tensile stress-strain curves of four kinds of carbon black-filled rubbers with different volume contents were obtained by mechanical experiments, and the fine morphology maps of the carbon black-filled rubber composites were obtained by electron microscope experiments. Based on the hyperelastic constitutive model of rubber, an ellipsoidal carbon black particles randomly distributed finite element model was established using DIGIMAT and ABAQUS, and uniaxial tensile simulation was carried out on the established two-dimensional model. The effects of the volume fraction, distribution angle and number of agglomerates of carbon black particles on the stress-strain relationship curve and stress distribution of the composites were analyzed. The results show that: with the increasing volume fraction of carbon black particles, the stiffness value of the composite material becomes larger; when the particle direction is 0° to the load direction, the strength of the material is improved and the stress concentration phenomenon is less; with the increasing number of carbon black agglomerates, the strength of the composite material decreases and the stress concentration phenomenon is obvious in agglomerated area. | '''Abstract:''' The unidirectional tensile stress-strain curves of four kinds of carbon black-filled rubbers with different volume contents were obtained by mechanical experiments, and the fine morphology maps of the carbon black-filled rubber composites were obtained by electron microscope experiments. Based on the hyperelastic constitutive model of rubber, an ellipsoidal carbon black particles randomly distributed finite element model was established using DIGIMAT and ABAQUS, and uniaxial tensile simulation was carried out on the established two-dimensional model. The effects of the volume fraction, distribution angle and number of agglomerates of carbon black particles on the stress-strain relationship curve and stress distribution of the composites were analyzed. The results show that: with the increasing volume fraction of carbon black particles, the stiffness value of the composite material becomes larger; when the particle direction is 0° to the load direction, the strength of the material is improved and the stress concentration phenomenon is less; with the increasing number of carbon black agglomerates, the strength of the composite material decreases and the stress concentration phenomenon is obvious in agglomerated area. | ||
Revision as of 09:39, 12 January 2024
Back to Top
Document information
Published on 25/01/24
Accepted on 04/01/24
Submitted on 20/10/23
Volume 40, Issue 1, 2024
DOI: 10.23967/j.rimni.2024.01.002
Licence: CC BY-NC-SA license
Share this document
claim authorship
Are you one of the authors of this document?