m (JSanchez moved page Draft Sanchez Pinedo 789748842 to Mapari et al 2023a) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
In recent years, the use of Triply Periodic Minimal Surface (TPMS) lattice structures has gained popularity due to their advantages like high surface to volume ratio and their lightweight potential. Nowadays, TPMS lattice structures can be seen in many fields, including aerospace and medical applications, which can be fabricated using AM methods like Laser Powder Bed Fusion (PBF-LB/M) process. During the PBF-LB/M process, the transient emperature change is caused by the cyclic nature of the thermal load resulting in the accumulation of residual stresses (RS). These RS can cause dimensional inaccuracies, warpageand have a severe impact on the loading capacity and quality of the PBF-LB/M part. In this paper, the effect of RS on the mechanical properties of primitive and gyroid TPMS lattice structures of volume fraction 20%, 30% and 40% undergoing compression testing is studied using Finite Element Analysis (FEA) and experiments. The sequentially coupled thermomechanical finite element model is used to account for the RS accumulation and its effect on Young’s modulus, yield strength and Specific Energy Absorption (SEA). | In recent years, the use of Triply Periodic Minimal Surface (TPMS) lattice structures has gained popularity due to their advantages like high surface to volume ratio and their lightweight potential. Nowadays, TPMS lattice structures can be seen in many fields, including aerospace and medical applications, which can be fabricated using AM methods like Laser Powder Bed Fusion (PBF-LB/M) process. During the PBF-LB/M process, the transient emperature change is caused by the cyclic nature of the thermal load resulting in the accumulation of residual stresses (RS). These RS can cause dimensional inaccuracies, warpageand have a severe impact on the loading capacity and quality of the PBF-LB/M part. In this paper, the effect of RS on the mechanical properties of primitive and gyroid TPMS lattice structures of volume fraction 20%, 30% and 40% undergoing compression testing is studied using Finite Element Analysis (FEA) and experiments. The sequentially coupled thermomechanical finite element model is used to account for the RS accumulation and its effect on Young’s modulus, yield strength and Specific Energy Absorption (SEA). | ||
| + | |||
| + | == Full Paper == | ||
| + | <pdf>Media:Draft_Sanchez Pinedo_789748842pap_76.pdf</pdf> | ||
Latest revision as of 13:16, 16 November 2023
Abstract
In recent years, the use of Triply Periodic Minimal Surface (TPMS) lattice structures has gained popularity due to their advantages like high surface to volume ratio and their lightweight potential. Nowadays, TPMS lattice structures can be seen in many fields, including aerospace and medical applications, which can be fabricated using AM methods like Laser Powder Bed Fusion (PBF-LB/M) process. During the PBF-LB/M process, the transient emperature change is caused by the cyclic nature of the thermal load resulting in the accumulation of residual stresses (RS). These RS can cause dimensional inaccuracies, warpageand have a severe impact on the loading capacity and quality of the PBF-LB/M part. In this paper, the effect of RS on the mechanical properties of primitive and gyroid TPMS lattice structures of volume fraction 20%, 30% and 40% undergoing compression testing is studied using Finite Element Analysis (FEA) and experiments. The sequentially coupled thermomechanical finite element model is used to account for the RS accumulation and its effect on Young’s modulus, yield strength and Specific Energy Absorption (SEA).
Full Paper
Document information
Published on 16/11/23
Submitted on 16/11/23
DOI: 10.23967/c.simam.2023.007
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?