| Line 7: | Line 7: | ||
<pdf>Media:Draft_Content_863172533-3283_paper-1874-document.pdf</pdf> | <pdf>Media:Draft_Content_863172533-3283_paper-1874-document.pdf</pdf> | ||
| − | == | + | == Full Paper == |
<pdf>Media:Draft_Content_863172533-3283_paper-9895-document.pdf</pdf> | <pdf>Media:Draft_Content_863172533-3283_paper-9895-document.pdf</pdf> | ||
Latest revision as of 08:44, 20 July 2022
Abstract
The end-grain bonding of timber components with the Timber Structures 3.0 technology (TS3) is an emerging construction method in timber engineering. For onsite applications at low ambient temperatures down to 0 °C, it is being investigated numerically and experimentally if it’s possible to heat the butt-joint to above 17 °C during the curing process using a heating wire. The current research results show that this is basically possible.
Full Paper
Back to Top
GET PDF
Document information
Published on 05/07/22
Submitted on 05/07/22
Volume 1600 Geomechanics and Natural Materials, 2022
DOI: 10.23967/wccm-apcom.2022.104
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?