(Created page with " == Abstract == Over the last years, several optimization strategies were conducted to find the optimal shape minimazing internal stress or total weight (volume) of shell str...") |
|||
(One intermediate revision by the same user not shown) | |||
Line 7: | Line 7: | ||
<pdf>Media:Draft_Content_145540299-1857_paper-6644-document.pdf</pdf> | <pdf>Media:Draft_Content_145540299-1857_paper-6644-document.pdf</pdf> | ||
− | == | + | == Full Paper == |
<pdf>Media:Draft_Content_145540299-1857_paper-3648-document.pdf</pdf> | <pdf>Media:Draft_Content_145540299-1857_paper-3648-document.pdf</pdf> |
Over the last years, several optimization strategies were conducted to find the optimal shape minimazing internal stress or total weight (volume) of shell structures. In recent times, this structure typology gained a great importance among researchers and the scientific community for the renowed interest in the form-findind optimization of column-free space solution for large span roofing constructions. In the present paper, a form-finding of a shallow grid shells was introduced basing on the multy-body rope approach (MRA) for the definitions of vault shapes and different hole percentage. In order to obtain an experimental validation, a physical model was reproduced at the laboratory scale performing ad hoc measurements to compare the observed respect to the simulated behaviour. A 3D printing procedure based on the Fuse Deposition Modeling (FDM) technique in polylactide (PLA) material was used to realise form-works of the cement based blocks of the scaled prototype. Several static and dynamic load configurations are investigated, collecting into a sensitivity analysis the parameters which mainly affect the structural behaviour. To simulate earthquake ground motion an assigned frequency range as dynamic input to the structure was provided by a shaking table. Finally, some preliminary considerations of the dynamic response of the model were provided testing the robustness of the form-finding approach when horizontal load are taken into account.
Published on 06/07/22
Submitted on 06/07/22
Volume 900 Structural Mechanics, Dynamics and Engineering, 2022
DOI: 10.23967/wccm-apcom.2022.049
Licence: CC BY-NC-SA license
Are you one of the authors of this document?