Revision as of 20:06, 31 March 2022

Abstract

This work presents an experimental method to determine the cohesive law of thin adhesive joints in mixed mode. The proposed method is based on the MMB (Mixed Mode Bending test). The Energy release Rate and Crack Tip Relative Displacement are determined based on a compliance variation data reduction method by processing the global load displacement curve, without monitoring the crack length and the crack tip relative displacement during the test. Representing the energy release rate versus relative displacement the cohesive law is determined by numerical differentiation. The method is validated numerically by virtual tests including the cohesive zone model. The results reveal that the proposed data reduction scheme is suitable to obtain the mixed mode cohesive law using only the load and displacement data obtained from the testing machine, without any external displacement measurement technique and without any assumption of the form of the cohesive law.

Full document