(Created page with "== Abstract == The aim of the research is focused on the manufacture of multiscale reinforced composites with self-monitoring capabilities. In order to achieve it, reference...")
 
m (Scipediacontent moved page Draft Content 479718489 to Jimenez-Suarez et al 2018a)
(No difference)

Revision as of 16:44, 31 March 2022

Abstract

The aim of the research is focused on the manufacture of multiscale reinforced composites with self-monitoring capabilities. In order to achieve it, reference material based on epoxy resin and glass fiber fabric has been modified by the addition of carbon nanotubes which allow the creation of a nanoreinforcement electrically conductive percolation network. The registration of electrical resistance variations due to strain or damage can be used to monitorize these effects caused by the mechanical loads. The research also studies the modification of the electrical properties (electrical conductivity measured in both transverse and longitudinal directions) and interlaminar mechanical properties caused by the use of nanoreinforced resins or surface modified fabrics. Multiscale reinforced composites manufactured allow the detection and partial location of damage caused during the interlaminar strength test. Moreover, differences in sensitivity due to manufacturing method and nanoreinforcement used have been clarified.

Full document

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top
GET PDF

Document information

Published on 29/04/18
Accepted on 29/04/18
Submitted on 29/04/18

Volume 02 - Comunicaciones Matcomp17 (2018), Issue Num. 2 - Aplicaciones y compuestos multifuncionales, 2018
DOI: 10.23967/r.matcomp.2018.04.013
Licence: Other

Document Score

0

Views 1
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?