Latest revision as of 14:57, 30 November 2021

Abstract

The need to evaluate the integrity of wooden structural elements is constantly increasing. Non-destructive methods are becoming more popular in this field of research. One type of non-destructive testing is the ultrasonic imaging method, which allows the analysis of internal wood structures without disturbing their state and integrity. In this study, we are interested in assessing the effect of wood condition on the ultrasound time of flight (TOF). The research was carried out on wooden beams, which were obtained from a historical building. The images obtained from ultrasound tomography were compared with results of a visual inspection.Places of discontinuities, voids and cracks in wood caused a much lower velocity of wave propagation.The location of the wood core was illustrated by the places with the highest velocity. The article proved the validity of using ultrasonic tomography to assess the technical condition of historic wooden beams.

Full document

References

[1] P. Niemz and D. Mannes, “Non-destructive testing of wood and wood-based materials,” J. Cult. Herit., vol. 13, no. 3, pp. S26–S34, 2012.

[2] T. C. Mai, S. Razafindratsima, Z. M. Sbartaï, F. Demontoux, and F. Bos, “Nondestructive evaluation of moisture content of wood material at GPR frequency,”Constr. Build. Mater., vol. 77, pp. 213–217, 2015.

[3] R. Martínez-Sala, I. Rodríguez-Abad, R. Diez Barra, and R. Capuz-Lladró, “Assessment of the dielectric anisotropy in timber using the nondestructive GPR technique,” Constr. Build. Mater., vol. 38, pp. 903–911, 2013.

[4] V. Bucur, “Techniques for high resolution imaging of wood structure: A review,” Meas. Sci. Technol., vol. 14, no. 12, 2003.

[5] M. Pastorino et al., “A microwave tomographic system for wood characterization in the forest products industry,” Wood Mater. Sci. Eng., vol. 10, no. 1, pp. 75–85, 2015.

[6] F. C. Beall, “Overview of the use of ultrasonic technologies in research on wood properties,” Wood Sci. Technol., vol. 36, no. 3, pp. 197–212, 2002.

[7] A. Arciniegas, F. Prieto, L. Brancheriau, and P. Lasaygues, “Literature review of acoustic and ultrasonic tomography in standing trees,” Trees - Struct. Funct., vol. 28, no. 6, pp. 1559–1567, 2014.

[8] P. Nilakantan, “X-ray studies of wood, lignin and wood-cellulose,” Proc. Indian Acad. Sci. - Sect. A, vol. 5, no. 2, pp. 166–174, 1937.

[9] Q. Wei, B. Leblon, and A. la Rocque, “On the use of X-ray computed tomography for determining wood properties: A review 1,” Can. J. For. Res., vol. 41, no. 11, pp. 2120– 2140, 2011.

[10] K. Kobayashi, S. W. Hwang, T. Okochi, W. H. Lee, and J. Sugiyama, “Non-destructive method for wood identification using conventional X-ray computed tomography data,” J. Cult. Herit., vol. 38, pp. 88–93, 2019.

[11] J. L. Paris and F. A. Kamke, “Quantitative wood-adhesive penetration with X-ray computed tomography,” Int. J. Adhes. Adhes., vol. 61, pp. 71–80, 2015.

[12] Y. Tomikawa, “Non destructive Inspection of wooden Poles using Ultrasonic Tomogrphy,” IEEE Trans. UFFC, vol. 33, pp. 354–358, 1986.

[13] E. Comino, V. Socco, R. Martinis, G. Nicolotti, and L. Sambuelli, “Ultrasonic tomography for wood decay diagnosis.,” in International Symposium on Plant Health in Urban Horticulture, Braunschweig, 2000, p. 279.

[14] G. Deflorio, S. Fink, and F. W. M. R. Schwarze, “Detection of incipient decay in tree stems with sonic tomography after wounding and fungal inoculation,” Wood Sci. Technol., vol. 42, no. 2, pp. 117–132, 2008.

[15] N. J. Brazee, R. E. Marra, L. Göcke, and P. Van Wassenaer, “Non-destructive assessment of internal decay in three hardwood species of northeastern North America using sonic and electrical impedance tomography,” Forestry, vol. 84, no. 1, pp. 33–39, 2011.

[16] B. Yan, C. Wu, and H. Ma, “Study on the method of nonmetallic defects based on ultrasonic tomography and morphology,” Proc. 2017 12th IEEE Conf. Ind. Electron. Appl. ICIEA 2017, vol. 2018-Febru, pp. 1287–1292, 2018.

[17] R. C. Alves, J. N. R. Mantilla, C. F. Bremer, and E. V. M. Carrasco, “Application of Acoustic Tomography and Ultrasonic Waves to Estimate Stiffness Constants of Muiracatiara Brazilian Wood,” vol. 10, no. 2010, pp. 1845–1856, 2015.

[18] C. Colla, “Verification of sonic tomography outcome through local testing of mechanical properties in historic timber beam,” J. Herit. Conserv., vol. 47, pp. 71–79, 2016.

[19] L. P. Perlin, Â. Valle, R. Caldas, and D. A. Pinto, “New method to locate the pith position in a wood cross-section based on ultrasonic measurements,” vol. 169, pp. 733–739, 2018.

[20] J. Qin, X. Liu, K. Van Den Abeele, and G. Cui, “The study of wood knots using acoustic nondestructive testing methods,” Ultrasonics, vol. 88, pp. 43–50, 2018.

[21] L. Espinosa, F. Prieto, L. Brancheriau, and P. Lasaygues, “Effect of wood anisotropy in ultrasonic wave propagation : A ray-tracing approach,” vol. 91, no. April 2018, pp. 242–251, 2019.

[22] L. Espinosa, F. Prieto, L. Brancheriau, and P. Lasaygues, “Quantitative parametric imaging by ultrasound computed tomography of trees under anisotropic conditions: Numerical case study,” Ultrasonics, no. 26, p. 106060, 2019.

[23] A. C. Kak and M. Slaney, Principles of Computerized Tomographic Imaging. New York: The Institiute of Electrical and Electronics Engineers, Inc., 1988.