Latest revision as of 14:37, 30 November 2021

Abstract

Uncertainties play a key role in the structural assessment in the existing buildings. They are mainly associated with materials, geometries and loads. The reduction of these uncertainties is one of the main challenges for researchers who approach this type of project. The aim of this work is the reduction of uncertainties through a sensitivity analysis. These analyses allow understanding the structural overall behaviour and they are useful to the in-situ test planning. The proposed sensitivity analysis is used as cognitive evaluation, analyzing the influences of each parameter on the structural behaviour, and as improvement assessment, evaluating the effectiveness of the intervention proposals. Furthermore, such approach reduces the impact of the experimental campaign and the intervention proposals, in terms of invasiveness, time and cost. The research is carried out through the selection of a case study, the “Quartel da Tropa” (SC), Brazil. It is used to show how the proposed approach can be applied for the structural assessment of historical buildings. The information collected was elaborated with Historical Building Information Modeling (H-BIM) and analyzed through finite element method software. The proposed research allows increasing the level of knowledge of the historical construction of the Quartel da Tropa, through the sensitivity analysis and the experimental test design of the structure. Such an approach suggests how not only the longitudinal Young’s Modulus (E) and the specific weight (w) of the masonry are the main parameters to avoid significant errors in the results in terms of structural assessment. Indeed, type of wooden species, type of structural connection, different types of masonry characteristic in different structural elements must be considered.

Full document

References

[1] Saltelli, A., Tarantola, S., Campolongo, F., and Ratto, M. Sensitivity analysis in practice: a guide to assessing scientific models, Vol. I (2004). New York: Wiley.

[2] Boscato, G., Russo, S., Ceravolo, R., and Fragonara, L. Z. Global sensitivity‐based model updating for heritage structures. Comp. Aid. Civ. Infr. Eng. (2015) 30(8): 620-635.

[3] Gentile, C., Saisi, A., and Cabboi, A. Structural identification of a masonry tower based on operational modal analysis. Int. J. Archit. Herit. (2015) 9(2): 98-110.

[4] Asgari, B., Osman, S. A., and Adnan, A. Sensitivity analysis of the influence of structural parameters on dynamic behaviour of highly redundant cable-stayed bridges. Adv. Civ. Eng. (2013).

[5] Cattari, S., Lagomarsino, S., Bosiljkov, V., and D’Ayala, D. Sensitivity analysis for setting up the investigation protocol and defining proper confidence factors for masonry buildings. Bull. Earthq. Eng. (2015) 13(1): 129-151.

[6] Carvalho, J., Ortega, J., Lourenço, P. B., Ramos, L. F., and Roman, H. Safety analysis of modern heritage masonry buildings: Box-buildings in Recife, Brazil. Eng. Struct. (2014) 80: 222-240.

[7] CNR, DT. 212 2013. Istruzioni per la Valutazione Affidabilistica della Sicurezza Sismica di Edifici Esistenti. Consiglio nazionale delle ricerche, 14 (2014).

[8] Antonopoulou, S., and Bryan, P. Historic England BIM for Heritage: Developing a Historic Building Information Model. Swindon: Historic England (2017). Retrieved March 10, 2019.

[9] Directive of the Prime Minister, Italian Guidelines for evaluation and mitigation of seismic risk to Cultural Heritage, Directive. Rome, Italy, 2007.

[10] Tonera R., Fortalezas de Santa Catarina a Caminho de tornarem-se Patrimônio Mundial. Florianópolis, Brazil (2010). Information available at http://fortalezas.org/

[11] Terezo, R. F. Avaliação das estruturas de madeira do quartel da tropa da fortaleza da ilha de Anhatomirim. (2005). GIEM, Grupo Interdisciplinar de Estudos da Madeira. Florianópolis: UFSC.

[12] Calì, A., do Valle, Â., and de Moraes, P. D. Building Information Modeling and Structural Analysis in the Knowledge Path of a Historical Construction. In: R. Aguilar et al. (Eds.): Structural Analysis of Historical Constructions, RILEM Bookseries 18 (2019), pp. 2071–2079.

[13] Lagomarsino, S., Penna, A., Galasco, A., and Cattari, S. TREMURI program: an equivalent frame model for the nonlinear seismic analysis of masonry buildings. Eng. Struct. (2013). 56: 1787-1799.

[14] Pereira, R. L. Estruturas de coberta da Arquitetura religiosa em Pernambuco tipologia, patologia e intervenções. Rev. Bras. Arquem., Rest. Cons. (2007) 1(6): 332 – 337. AERPA Editor, 2007.

[15] Ho-Le, K. Finite element mesh generation methods: a review and classification. Comput. Des. (1988) 20(1): 27-38.

[16] Katili, I. A new discrete Kirchhoff-Mindlin element based on Mindlin-Reissner plate theory and assumed shear strain fields - Part I : An extended DKT element for thick-plate bending analysis. Int. J. Numer. methods Eng., (1993) 36(11): 1859–1883.

[17] S. A. Coons, Surfaces for computer aided desing of space form. USA (1967) (No. MAC TR-41). Massachusetts Inst. of Tech. Cambridge Project MAC.

[18] Circolare, 617/09. Istruzioni per l’applicazione delle Norme Tecniche per le Costruzioni di cui al DM 14 gennaio 2008. Gazzetta Ufficiale Della Repubblica Italiana.

[19] Associação Brasileira de Normas Técnicas. ABNT NBR 7190: Projeto de estruturas de madeira (1997).

[20] Associação Brasileira de Normas Técnicas. ABNT NBR 6118: Projeto de estruturas de concreto-procedimento. ABNT. (2007).

[21] Roca, P., Cervera, M., and Gariup, G. Structural analysis of masonry historical constructions. Classical and advanced approaches. Arch Comput Meth Eng. (2010) 17(3): 299-325.

[22] Rocco Lahr, F. A., Christoforo, A. L., Chahud, E., Branco, L. A. M. N., Battistelle, R. A., and Valarelli, I. D. Poisson’s ratios for wood species for structural purposes. Adv. Mater. Res. (2015) 1088: 690-693. Trans Tech Publications Ltd.

[23] Binda, L., and Saisi, A. Non destructive testing applied to historic buildings: The case of some Sicilian Churches. Hist. Constr. (2001): 29-46.