Latest revision as of 14:36, 30 November 2021

Abstract

Existing heritage buildings are often composed of diverse structural typologies, representing a challenge for structural analysis. This work investigates the use of nonlinear static analysis to assess the seismic behaviour of hybrid timber-masonry buildings. The proposed methodology includes the use of Lumped Plasticity Models (LPM) and Macro-Mechanical Finite Element (FE) approaches to simulate the response of structures composed of timber frames and masonry walls. Benchmark experiments on timber and masonry specimens subjected to lateral loads are used to calibrate the constitutive laws governing the behaviour of the proposed models. The calibrated models are used to appraise the seismic response of an existing timber-masonry building located in the historical centre of Valparaíso (Chile). The results predict the nonlinear acceleration-displacement capacity of the buildings, as well as the expected damage of the structure, revealing the potential local and global failure mechanisms.

Full document

References

[1] Ciocci, M.P., Sharma, S., and Lourenço, P. Engineering Simulations of a Super-Complex Cultural Heritage Building: Ica Cathedral in Peru. Meccanica (2018) 53 (7): 1931-58.

[2] Kouris, L.A.S., and Kappos, A.J. Detailed and Simplified Non-Linear Models for Timber- Framed Masonry Structures. Journal of Cultural Heritage (2012) 13 (1): 47-58.

[3] Poletti, E. Characterization of the Seismic Behaviour of Traditional Timber Frame Walls. PhD dissertation (2013). Department of Civil Engineering, University of Minho.

[4] Ciocci, M. P. Structural Analysis of the Timber Structure of Ica Cathedral, Peru. MSc Thesis. (2015). Department of Civil Engineering, University of Minho.

[5] Parisi, F., Ivano, I., Balsamo, A., Augenti, N., and Prota, A. In-Plane Behaviour of Tuff Masonry Strengthened with Inorganic Matrix–Grid Composites. Composites Part B: Engineering (2013) 45 (1): 1657-66.

[6] Griffith, M.C., and Vaculik, J. Out-of-Plane Flexural Strength of Unreinforced Clay Brick Masonry Walls. TMS Journal (2007): 53–68

[7] Endo, Y., Pelà, L., Roca, P., Da Porto, F., Modena, C. Comparison of Seismic Analysis Methods Applied to a Historical Church Struck by 2009 L’Aquila Earthquake. Bulletin of Earthquake Engineering (2015) 13 (12): 3749–78

[8] Pantò, B., Silva, L., Vasconcelos, G., and Lourenço, P. Macro-Modelling Approach for Assessment of out-of-Plane Behaviour of Brick Masonry Infill Walls. Engineering Structures (2018): 529–49.

[9] Stafford-Smith, B. Lateral Stiffness of Infilled Frames. Journal of Structural Division, ASCE (1963) 88 (6): 183-199.

[10] Bertoldi, S.H., Decanini L.D., and Gavarini, C. Telai Tamponati Soggetti ad Azioni Sismiche Un Modelo Semplificato Confronto Sperimentale e Numerico. In 6th Convegno Nazionale L’Ingegneria Sismica in Italia (1993): 815-24.

[11] Decanini, L., Mollaioli, F., Mura, A., Saragoni, R. Seismic Performance of Masonry Infilled R/C Frames. In 13th World Conference on Earthquake Engineering (2004).

[12] Sassun, K., Sullivan T. J., Morandi, P., and Cardone D. Characterising the In-Plane Seismic Performance of Infill Masonry. Bulletin of the New Zealand Society for Earthquake Engineering (2016) 49 (1): 100–117.

[13] CSI. CSI Analysis Reference Manual (2016).

[14] Darwin, D. and Pecknold, D. A. W. Inelastic Model for Cyclic Biaxial Loading of Reinforced Concrete. Civil Engineering Studies SRS-409 (1974), University of Illinois, Urbana Champaign, Illinois.

[15] Vecchio, F.J. and. Collins, M. P. The Modified Compression-field Theory for Reinforced Concrete Elements Subjected to Shear. ACI Journal Proceedings (1986) 83 (2): 219-31.

[16] Kaushik, H. B., Rai D. C., and Jain, S. K. and ASCE, M. Stress-strain Characteristics of Clay Brick Masonry under Uniaxial Compression. Journal of Materials in Civil Engineering (2007) 19 (9): 728-39.

[17] D’Ambra, C., Lignola, G. P. and Prota, A. Multi-Scale Analysis of In-plane Behaviour of Tuff Masonry. The Open Construction and Building Technology Journal (2016) 10:135-151.

[18] CEN. 2005. EN 1996-1-1: Eurocode 6: Design of Masonry Structures - Part 1-1: General Rules for Reinforced and Unreinforced Masonry Structures.

[19] Chen, C., Qiu, H. and Lu, Y. Flexural behaviour of timber dovetail mortise-tenon joints. Construction and Building Materials (2016) 112: 366-377.

[20] NTC. Circolare 21 Gennaio 2019 n. 7 C.S.LL.PP. Istruzioni per l’applicazione Dell’aggiornamento Delle ‘Norme Tecniche per Le Costruzioni’ Di Cui Al D.M. 17/01/2018.” Consiglio Superiore Dei Lavori Pubblici.