Latest revision as of 14:31, 30 November 2021

Abstract

This paper presents an experimental campaign carried out in an historical industrial building of Barcelona from the 19th century, considering in-situ and laboratory minor destructive testing (MDT) techniques. The results obtained showed a good relationship between the in-situ MDT techniques and the tests carried out in the laboratory. The experimental results from different portions of the large-scale building allowed the discovery of different material typologies deriving from different construction phases.

Full document

References

[1] A. W. Hendry, Structural Masonry. London: Macmillan Education UK, (1998).

[2] L. Pelà, P. Roca, and A. Aprile, “Combined In-Situ and Laboratory Minor Destructive Testing of Historical Mortars,” Int. J. Archit. Herit., vol. 12, no. 3, (2018), pp. 334–349.

[3] European Committee for Standardization (CEN), “EN 1015-12 Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates.” (2016).

[4] European Committee for Standardization (CEN), “EN 772-1+A1 Methods of test for Masonry Units - Part 1: Determination of Compressive Strength.” (2016).

[5] Deutsche Norm, “DIN 18555-9 Testing of mortar containing mineral binders - Part 9: Determining the compressive strength of hardened mortar.” (1999).

[6] L. Pelà, E. Canella, A. Aprile, and P. Roca, “Compression test of masonry core samples extracted from existing brickwork,” Constr. Build. Mater., vol. 119, (2016), pp. 230–240.

[7] J. Segura, L. Pelà, P. Roca, and A. Cabané, “Experimental analysis of the size effect on the compressive behaviour of cylindrical samples core-drilled from existing brick masonry,” Constr. Build. Mater., vol. 228, (2019), p. 116759.

[8] R. C. de Vekey and M. Sassu, “Comparison of non-destructive in-situ mechanical test on masonry mortars: The PNT-G method and the helix method,” in Proceedings of the 11th international brick and block masonry conference (IB2MC), (1997), pp. 376–384.

[9] M. L. Tavares, M. R. Veiga, and A. Fragata, “Grouting mortars for consolidation of historical renders showing loss of adhesion,” in 2nd Conference on Historic Mortars - HMC 2010 and RILEM TC 203-RHM final workshop, (2010), pp. 743–752.

[10] American Society for Testing and Materials (ASTM), “C67-18 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile.” (2005).

[11] UIC, “Leaflet 778-3R: Recommendations for the inspection, assessment and maintainance of masonry arch bridges.” UIC – International Union of Railways, Paris, France, (1995).

[12] European Committee for Standardization (CEN), “EN 1996-1-1 Design of masonry structures -Part 1-1: General rules for reinforced and unreinforced masonry structures.” (2005).

[13] L. Pelà, S. Saloustros, and P. Roca, “Cylindrical samples of brick masonry with aerial lime mortar under compression: Experimental and numerical study,” Constr. Build. Mater., vol. 227, no. September, (2019), p. 116782.

[14] A. Benedetti and M. Tarozzi, “Interpretation formulas for in situ characterization of mortar strength,” Constr. Build. Mater., vol. 242, (2020), p. 118093.

[15] W. A. Ferguson and J. Skandamoorthy, “The screw pull-out test for the in-situ measurement of the strength of masonry materials,” in Proceedings of the 10th international brick and block masonry conference, (1994), pp. 1257–66.

[16] Masonry Standards Joint Committee (MSJC), “Specification for Masonry Structures (ACI 530.1-05/ASCE 6-05/TMS 602-05).” (2004).

[17] European Committee for Standardization (CEN), “EN 1052-1 Methods of test for masonry - Part 1 : Determination of compressive strength.” (1999).

[18] J. Segura, L. Pelà, and P. Roca, “Monotonic and cyclic testing of clay brick and lime mortar masonry in compression,” Constr. Build. Mater., vol. 193, (2018), pp. 453–466.