Latest revision as of 14:26, 30 November 2021

Abstract

Retrofit of unreinforced masonry (URM) structures is incessantly attracting interests of masonry professionals. Because there are enormous URM structure stocks in different parts of the world that have shown vulnerability to damage against out-of-plane actions due to having limited flexural strength and deformation capacity [1]. As such, there is a global trend of promoting the development of sustainable retrofit techniques for URM structures. The authors' previous study [2] has introduced the application of oriented strand board type 3 (OSB/3) as a prospective sustainable retrofit material for URM wall with evidence of improving the flexural performances. This paper presents, for the first time,experimental works on 1115 x 1115 x 215 mm double wythe single leaf URM walls. Specifically, quasi-static out-of-plane loading tests were carried out on two plain specimens, two single-sided retrofitted walls and two double-sided retrofitted walls. The flexural and displacement capacities were evaluated in both plain and retrofitted specimens, and the results substantiated that OSB/3 application improves the flexural capacity of masonry wall. Therefore, the application of OSB/3 for retrofitting URM buildings can be considered as an inexpensive, efficient and sustainable retrofit technique.

Full document

References

[1] Lourenço P., Mendes N., Costa A., and Campos-Cost A. Methods and Challenges on the Out-of-Plane Assessment of Existing Masonry Buildings. International Journal of Architectural Heritage, 11(1) pp.1.

[2] Dauda J., Iuorio O., and Lourenço P. (2019). Experimental Study of Out-of-Plane Behavior of Timber Retrofitted Masonry Prisms. In P.B.Dillon & F.S.Fonseca (Eds.), Proceedings of the Thirteenth North American Masonry Conference, Salt Lake City, Utah (pp. 1100–1109).

[3] Costa, A., Arêde, A., Costa, A. and Oliveira, C. (2011). Out-of-plane Behaviour of Existing Stone Masonry Buildings: Experimental Evaluation. Bulletin of Earthquake Engineering, 10(1), pp.93-111.

[4] Wang, C., Forth, J., Nikitas, N. and Sarhosis, V. (2017). Retrofitting Of Masonry Walls By Using a Mortar Joint Technique: Experiments And Numerical Validation. Engineering Structures, 117, p.58-70.

[5] Priestley, M. (1985). Seismic Behaviour of Unreinforced Masonry Walls. Bulletin of the New Zealand National Society for Earthquake,

[6] Prabaharan, A. (2008). Seismic Strengthening of Masonry Buildings. PhD. Anna University Chennai 600 025.

[7] Nazir, S. (2015). Studies on the Failure of Unreinforced Masonry Shear Walls. PhD. Queensland University of Technology, Australia.

[8] Dauda J. and Iuorio O. (2019). Timber-Masonry Composite Systems for Retrofit of Unreinforced Masonry Wall. In Proceedings of 2019 Society for Earthquake and Civil Engineering Dynamics Conference (SECED), London September 2019.

[9] Dauda J., Iuorio O. and Lourenço P. (2020). Numerical Analysis and Experimental Characterization of Brick Masonry. International Journal of Masonry Research and Innovation, Vol. 5 Issue: 3, pp.321–347, DOI: 10.1504/IJMRI.2020.10028163.

[10] Dauda J., Iuorio, O. and Lourenco P. (2018). Characterization of Brick Masonry: Study towards Retrofitting URM Walls with Timber-Panels. In: 10th International Masonry Conference (10thIMC). In proceedings of 10th International Masonry Conference (10thIMC), 09-11 Jul 2018, Milan, Italy.

[11] Anon, A. (2018). Technical Information Sheet for Oriented Strand Board.

[12] ASTM E72 - 15 (2015). Standard Test Methods of Conducting Strength Tests of Panels for Building Construction. West Conshohocken, PA: ASTM International,