Latest revision as of 14:24, 30 November 2021

Abstract

The paper presents a description and results of the research concerning one of the scarf joints, so-called ‘lightning sign’ (also described as ‘Bolt of lightning’ or ‘Trait-de- Jupiter’). This joint has been used and can be commonly found in wooden historical structures and is considered to be an interesting example of carpentry longitudinal joints. In the experimental part timber beams with this type of joint shaped in the different planes, horizontal and vertical, reinforced with spindle fasteners (metal bolts), were subjected to four-point bending tests. As a result, the static equilibrium paths and the bending capacities of individual beams were obtained. They were compared to the load-bearing capacity of the continuous reference beam. Moreover, a simplified numerical analysis based on FEM was carried out for comparison the rigidity of individual beams. A comparison of the results for series of beams is discussed and some conclusions and possible directions of the future actions in the subject are presented.

Full document

References

[1] Jasieńko J., Nowak T., Karolak A. (2014). Historical carpentry joints. Wiadomości Konserwatorskie – Journal of Heritage Conservation, 40, 58-82.

[2] Šobra K., Fonseca Ferreira C., Riggio M., D’Ayala D., Arriaga F., Aira J. R. (2015). A new tool for the structural assessment of historic carpentry joints. In: Proceedings of the 3rd International Conference on Structural Health Assessment of Timber Structures – SHATIS’15, Wrocław, Poland, 9-11 September 2015.

[3] Ross P. (2002). Appraisal and repair of timber structures. Thomas Telford Ltd, London.

[4] Thelandersson S., Larsen H. J. (2003). Timber Engineering. John Wiley & Sons Ltd, Chichester, Chapter 16.

[5] Parisi M. A., Piazza M. (2008). Seismic strengthening of traditional carpentry joints. In: Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, 12-17 October 2008.

[6] Perria E. (2017). Characterization of halved undersquinted scarf joint and stop-splayed undersquinted & tabled scarf joint with key (Jupiter joint). PhD dissertation. University of Braunschweig – Institute of Technology, Department of Architecture and University of Florence, Department of Civil and Enviromental Engineering.

[7] Perez L. P. (2003). Design and construction of timber roof structures, built over different structural systems. Cases studium at the Valencia Community. In: Proceedings of the First International Congress on Construction History, Madrid, Spain, 20-24 January, 2003.

[8] Tampone G., Semplici M. (2006). Rescuing the Hidden European Wooden Churches Heritage, An International Methodology for Implementing a Data Base for Restoration Projects. In cooperation with Fly Events and Alter Ego Ing Arch S.r.l. (a Subsidiary Company of the Collegio degli Ingegneri della Toscana), Città di Castello.

[9] Mirabella-Roberti G., Bondanelli M. (2013). Study and analysis of XIV century timber built-up beams in Verona. Advanced Materials Research, 778, 511-516.

[10] Rug W., Linke G. (2015). Study on the load bearing capacity and the load- deferral behavior of wooden composite beams with a teethed joint. In: Proceedings of the 3rd International Conference on Structural Health Assessment of Timber Structures – SHATIS’15, Wrocław, Poland, 9-11 September 2015.

[11] Rug W., Thoms F., Grimm U., Eichbaum G., Abel S. (2012). Untersuchungen zur Biegetragfähigkeit von verzahnten Balken. Bautechnik 89, 26-36.

[12] Alberti L. B. (1965). L'Architettura di Leon Batista Alberti, Tradotta in lingua Fiorentina da Cosimo Bartoli. Con la aggiunta de disegni. Et altri diuersi Trattati del medesimo Auttore. Appresso Lionardo Torrentino.

[13] Ceraldi C., Costa A., Lippiello M. (2019). Stop-Splayed Scarf-Joint Reinforcement with Timber Pegs Behaviour. In: Aguilar R., Torrealva D., Moreira S., Pando M., Ramos L.F. (Eds.). Structural Analysis of Historical Constructions. Springer, Cham., 360-369.

[14] Hirst E., Brett A., Thomson A., Walker P., Harris R. (2008). The structural performance of traditional oak tension & scarf joints. In: Proceedings of the 10th World Conference on Timber Engineering, Miyazaki, Japan, 2-5 June 2008.

[15] Sangree R. H., Schafer B. W. (2009). Experimental and numerical analysis of a stop- splayed traditional scarf joint with key. Construction and Building Materials, 23, 376-385.

[16] Fajman P., Máca J. (2018). The effect of inclination of scarf joints with four pins. International Journal of Architectural Heritage, 12(4), 599-606.

[17] Fajman P. (2015). A scarf joint for reconstructions of historical structures. Advanced Materials Research, 969, 9-15.

[18] Fajman P., Máca J. (2015). Scarf joints with pins or keys and dovetails. In: Proceedings of the 3rd International Conference on Structural Health Assessment of Timber Structures – SHATIS’15, Wrocław, Poland, 9-11 September 2015.

[19] Fajman P., Máca J. (2014). The effect of key stiffness on forces in a scarf joint. In Proceedings of the 9th International Conference on Engineering Computational. Technology, vol. 40. Civil-Comp Press, Stirlingshire, United Kingdom.

[20] Fajman P., Máca J. (2014). The effect of key stiffness on forces in a scarf joint. In Proceedings of the 9th International Conference on Engineering Computational Technology, vol. 40. Civil-Comp Press, Stirlingshire, United Kingdom.

[21] Šobra K., Fajman P. (2013). Utilization of splice skew joint with a key in the reconstruction of historical trusses. Advanced Materials Research, 668, 207-212.

[22] Arciszewska-Kędzior A., Kunecký J., Hasníková H. (2016). Mechanical response of a lap scarf joint with inclined faces and wooden dowels under combined loading. Wiadomości Konserwatorskie – Journal of Heritage Conservation, 46, 80-88.

[23] Arciszewska-Kędzior A., Kunecký J., Hasníková H., Sebera V. (2015). Lapped scarf joint with inclined faces and wooden dowels: Experimental and numerical analysis. Engineering Structures, 94, 1-8.

[24] Arciszewska- Kędzior A., Kunecký J., Hasníková H. (2015). Mechanical response of a lap scarf joint with inclined faces and wooden dowels under combined loading. In: Proceedings of the 3rd International Conference on Structural Health Assessment of Timber Structures – SHATIS’15, Wrocław, Poland, 9-11 September 2015.

[25] Kunecký J., Hasníková H., Kloiber M., Milch J., Sebera V., Tippner J. (2018). Structural assessment of a lapped scarf joint applied to historical timber constructions in central Europe. International Journal of Architectural Heritage, 12.4, 666-682.

[26] Kunecký J., Sebera V., Hasníková H., Arciszewska-Kędzior A., Tippner J., Kloiber M. (2015). Experimental assessment of full-scale lap scarf timber joint accompanied by a finite element analysis and digital correlation. Construction and Building Materials, 76, 24-33.

[27] Kunecký J., Sebera V., Tippner J., Hasníková H., Kloiber M., Arciszewska- Kędzior A., Milch J. (2015). Mechanical performance and contact zone of timber joint with oblique faces. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 63, 1153- 1159.

[28] Kunecký J., Sebera V., Tippner J., Kloiber M. (2014). Numerical assessment of behavior of a historical central European wooden joint with a dowel subjected to bending. In: Proceedings of the 9th International Conference on Structural Analysis of Historical Constructions, Mexico City, Mexico, 15-17 October 2014.

[29] Structural Timber—Determination of Characteristic Values of Mechanical Properties and Density; PN-EN 384: 2016-10. PKN: Polish Committee for Standardization, Warsaw, Poland, 2016.

[30] Timber Structures. Structural Timber and Glued Laminated Timber. Determination of Some Physical and Mechanical Properties. PN-EN 408+A1: 2012; PKN: Polish Committee for Standardization, Warsaw, Poland, 2012.

[31] Bodig J., Jayne B. A. (1982). Mechanics of Wood and Wood Composites. Van Nostrad Reinhold, New York.

[32] Nowak T. (2007). Analysis of the static work of bent wooden beams reinforced with CFRP