Latest revision as of 14:18, 30 November 2021

Abstract

The paper describes in detail the application of a vibration-based structural health monitoring system installed in the “San Pedro Apostol” church of Andahuaylillas located in Cusco (Peru), a 16th century adobe church considered a representative example of South America baroque architecture. The results of three years of long-term vibration and temperature and humidity monitoring program are reported in detail in the paper, with a focus on the long-term and short-term correlations between natural frequencies and environmental parameters. The results demonstrate that an accurate estimation of the first eight frequencies in the range 2-6 Hz is possible in the case of complex adobe structure and the existence of an annual cyclical behavior of the natural frequencies with a clear correspondence with the changes in environmental conditions due to seasonal influences. The performed correlations of ambient conditions and structural parameters confirmed the presence of different timescales and their not negligible influence in the case of a vibration-based structural health monitoring assessment of adobe systems with large thermal inertia large thermal inertia.

Full document

References

[1] Varum, H., Tarque, N., Silveira, D., Camata, G., Lobo, B., Blondet, M., et al. Structural behaviour and retrofitting of adobe masonry buildings. Structural rehabilitation of old buildings. Springer, Berlin, Heidelberg. (2014). pp. 37-75.

[2] Houben, H., Guillard, H. Earth Construction: A Comprehensive Guide. Practical Action, London. (1994).

[3] Ciocci, M. P., Sharma, S., and Lourenço, P. B. Engineering simulations of a super-complex cultural heritage building: Ica Cathedral in Peru. Meccanica. (2018). 53(7): 1931-1958.

[4] Karanikoloudis, G., and Lourenço, P. B. Structural assessment and seismic vulnerability of earthen historic structures. Application of sophisticated numerical and simple analytical models. Eng. Struc. (2018). 160: 488-509.

[5] Saisi, A., C. Gentile, and A. Ruccolo. Continuous monitoring of a challenging heritage tower in Monza, Italy. J. Civ. Struct. Health Monit. (2018). 8(1): 77–90.

[6] Elyamani, A., O. Caselles, P. Roca, and J. Clapes. Dynamic investigation of a large historical cathedral. Struct. Control Hlth (2017). 24(3): e1885.

[7] Lorenzoni, F., F. Casarin, M. Caldon, K. Islami, and C. Modena. Uncertainty quantificatio in structural health monitoring: Applications on cultural heritage buildings. Mech. Syst. Signal Pr. (2016). 66:268–81.

[8] Ramos, L., Marques, L., Lourenço, P. B., De Roeck, G., Campos-Costa, A., Roque, J. Monitoring historical masonry structures with operational modal analysis: two case studies. Mech. Syst. Signal Pr. (2010), 24: 1291–1305.

[9] Ubertini, F., C. Gentile, and A. L. Materazzi. Automated modal identification in operational conditions and its application to bridges. Eng. Struc. (2013). 46:264–78.

[10] Maeck, J., B. Peeters, and G. De Roeck. Damage identification on the Z24 bridge using vibration monitoring. Smart Mater. Struct. (2001). 10(3):512.

[11] Zonno, G., R. Aguilar, R. Boroschek, and P. B. Lourenço. Experimental analysis of the thermohygrometric effects on the dynamic behavior of adobe systems. Constr. Build. Mater. (2019). 208:158–74.

[12] Zonno, G., Aguilar, R., Boroschek, R., and Lourenço, P. B. Environmental and ambient vibration monitoring of historical adobe buildings: applications in emblematic Andean churches. Int. J. Archit. Herit. (2019). https://doi.org/10.1080/15583058.2019.1653402

[13] Zonno, G., Aguilar, R., Boroschek, R., and Lourenço, P. B. Analysis of the long and short-term effects of temperature and humidity on the structural properties of adobe buildings using continuous monitoring. Eng. Struc. (2019). 196: 109299.

[14] Zonno, G., Aguilar, R., Boroschek, R., and Lourenço, P. B. Automated long-term dynamic monitoring using hierarchical clustering and adaptive modal tracking: validation and applications. J. Civ. Struct. Health Monit. (2018). 8(5): 791-808.

[15] KINEMETRICS. (2019). Obsidian 8x multichannel seismic recorder. https://kinemetrics.com.

[16] KINEMETRICS. (2019). EpiSensor ES-U2 uniaxial episensor accelerometer. https://kinemetrics.com.

[17] ONSET. (2019). HOBO RX3000 remote monitoring station data logger. http://www.onsetcomp.com.

[18] ONSET. (2019). S-THB-M008 temperature/relative humidity smart sensor. http://www.onsetcomp.com.