(Created page with "== Abstract == Highly adapted or misshaped meshes can have a strong influence on the conditioning of the finite element (FE) equations, which, in turn, has an impact on conve...") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | == Summary == |
Highly adapted or misshaped meshes can have a strong influence on the conditioning of the finite element (FE) equations, which, in turn, has an impact on convergence properties and accuracy of iterative methods for solving the resulting linear systems. In most of the available work, some local or global mesh regularity properties are required in order to bound the constants during the derivation of the estimates, which causes degeneration of these estimates in case of extreme mesh geometries or strong irregular anisotropic adaptation. The provided bound for the smallest eigenvalue of the FE equations has a similar form as the one by Graham and McLean [SIAM J. Numer. Anal., 44 (2006), pp. 1487–1513] but doesn't require any mesh regularity assumptions, neither global nor local. In particular, it is valid for highly adaptive, anisotropic, or non-regular meshes without any restrictions. | Highly adapted or misshaped meshes can have a strong influence on the conditioning of the finite element (FE) equations, which, in turn, has an impact on convergence properties and accuracy of iterative methods for solving the resulting linear systems. In most of the available work, some local or global mesh regularity properties are required in order to bound the constants during the derivation of the estimates, which causes degeneration of these estimates in case of extreme mesh geometries or strong irregular anisotropic adaptation. The provided bound for the smallest eigenvalue of the FE equations has a similar form as the one by Graham and McLean [SIAM J. Numer. Anal., 44 (2006), pp. 1487–1513] but doesn't require any mesh regularity assumptions, neither global nor local. In particular, it is valid for highly adaptive, anisotropic, or non-regular meshes without any restrictions. | ||
| − | + | ||
== Video == | == Video == | ||
{{#evt:service=cloudfront|id=258440|alignment=center|filename=121.mp4}} | {{#evt:service=cloudfront|id=258440|alignment=center|filename=121.mp4}} | ||
Latest revision as of 18:20, 21 June 2021
Summary
Highly adapted or misshaped meshes can have a strong influence on the conditioning of the finite element (FE) equations, which, in turn, has an impact on convergence properties and accuracy of iterative methods for solving the resulting linear systems. In most of the available work, some local or global mesh regularity properties are required in order to bound the constants during the derivation of the estimates, which causes degeneration of these estimates in case of extreme mesh geometries or strong irregular anisotropic adaptation. The provided bound for the smallest eigenvalue of the FE equations has a similar form as the one by Graham and McLean [SIAM J. Numer. Anal., 44 (2006), pp. 1487–1513] but doesn't require any mesh regularity assumptions, neither global nor local. In particular, it is valid for highly adaptive, anisotropic, or non-regular meshes without any restrictions.
Video
Document
Document information
Published on 21/06/21
Accepted on 21/06/21
Submitted on 21/06/21
Volume MS05 Mesh Adaptation Techniques for Numerical Simulation, 2021
DOI: 10.23967/admos.2021.023
Licence: CC BY-NC-SA license
Share this document
claim authorship
Are you one of the authors of this document?