(Created page with "== Abstract == Manufacturers of light motorcycles have always sought the use of more and more advanced materials. The application of carbon fiber in motorcycle parts design c...") |
m (Scipediacontent moved page Draft Content 786981141 to Nosko Mrzyglod 2021a) |
(No difference)
| |
Latest revision as of 17:41, 11 March 2021
Abstract
Manufacturers of light motorcycles have always sought the use of more and more advanced materials. The application of carbon fiber in motorcycle parts design can bring high strength, stiffness, and low weight in a manner previously unavailable. This article contains selected problems regarding the construction of a swingarm made of carbon fiber reinforced plastics (CFRP). The swingarm was made specifically for Honda NSF 100. For the analysis, series of tests such as geometry, FEM, and structural analysis was chosen. The analysis concludes that the swingarm shape that was adopted from the original steel made part is not suitable for CFRP use. The analysis showed manufacturing errors, like the inconsistent thickness of laminate and poor quality of assembling. The full potential of the CFRP material was not used.
Full document
Document information
Published on 11/03/21
Submitted on 11/03/21
Volume 1000 - Manufacturing and Materials Processing, 2021
DOI: 10.23967/wccm-eccomas.2020.296
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?