Latest revision as of 09:42, 5 March 2021

Abstract

Fibre reinforced polymers are important materials used in aviation due to their excellent specific properties enabling the reduction of fuel consumption. For example, carbon fibre reinforced epoxy resins are used in fuselage and wing structures. Glass fibre reinforced phenolic resins are mainly used for the interior panels due to their low weight and favourable fire properties. All these composite materials used in aviation have one thing in common: they are man-made. Renewable materials like bio-fibres and bio-resins are under investigation for a long time for composites but they did not made it into modern aircraft in high amounts yet. The project ECO-COMPASS under Horizon 2020 aims to bundle the knowledge of 17 partners from China and Europe to develop ecological improved composites for the use in aircraft interior and secondary structures [1]. Bio-based reinforcements, epoxy resin and sandwich cores are developed and improved for their application in aviation. Furthermore the use of recycled carbon fibres to increase the mechanical strength and multifunctional aspects of bio-composites are evaluated. In order to withstand the special stresses in aviation environment, protection technologies to mitigate the risks of fire, lightning and moisture uptake are under investigation. An adapted modelling and simulation will enable the optimization of the composite design. Electrical conductive composites for electromagnetic interference shielding and lightning strike protection are under investigation in ECOCOMPASS as well. The cooperation includes the exchange of knowledge and materials in order to optimize the development of ecological friendly composites.

Full document

References

[1] Bachmann J, Yi X, Gong H, et al. Outlook on ecologically improved composites for aviation interior and secondary structures. CEAS Aeronaut J (2018) 9: 533-543.

[2] Ramon E, Sguazzo C, Moreira PMGP. A Review of Recent Research on Bio-Based Epoxy Systems for Engineering Applications and Potentialities in the Aviation Sector. Aerospace. 2018; 5(4):110.

[3] Li C, Liu X, Zhu J, Zhang C, Guo J. Synthesis, Characterization of a Rosin-based Epoxy Monomer and its Comparison with a Petroleum-based Counterpart, Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, (2013) 50, 321–329

[4] Ma S, Liu X, Jiang Y, Tang Z, Zhang C, Zhu J. Bio-based epoxy resin from itaconic acid and its thermosets cured with anhydride and comonomers, Green Chemistry, 2013, 15, 245–254

[5] Dai J, Peng Y, Teng N, Liu Y, Liu C, Shen X, Mahmud S, Zhu J, Liu X. High-Performing and Fire-Resistant Biobased Epoxy Resin from Renewable Sources, ACS Sustainable Chemistry and Engineering 2018, 6, 7589−7599

[6] Yi X, Zhang X, Ding F, Tong J. Development of Bio-Sourced Epoxies for Bio-Composites. Aerospace, 2018; 5(2):65

[7] Zhang J, Shen Y, Jiang B, Li Y. Sound Absorption Characterization of Natural Materials and Sandwich Structure Composites. Aerospace, 2018; 5(3):75.

[8] Wang H, Xian G, Li H, Grafting of nano-TiO2 onto flax fibers and the enhancement of the mechanical properties of the flax fiber and flax fiber/epoxy composite, Composites Part A -Applied Science and Manufacturing 76 (2015) 172-180.

[9] Li Y, Yi X, Yu T, Xian G, An overview of structural-functional-integrated composites based on the hierarchical microstructures of plant fibers, Advanced Composites and Hybrid Materials, June 2018, 1(2), 231-246

[10] Fischer, H. & Schmid, H.G. (2013). Quality control for recycled carbon fibres. Polymers 11/2013, pp. 88-91

[11] Tse B, Yu X, Gong H, Soutis C. Flexural Properties of Wet-Laid Hybrid Nonwoven Recycled Carbon and Flax Fibre Composites in Poly-Lactic Acid Matrix. Aerospace, 2018; 5(4):120.

[12] Bachmann, J. and Wiedemann, M. Flexural Mechanical Properties of Hybrid Epoxy Composites Reinforced with Nonwoven Made of Flax Fibres and Recycled Carbon Fibres. Aerospace, 2018; 5(4):107.

[13] Otero, F., Martinez, X., Oller, S., Salomón, S. (2015). An efficient multi-scale method for non-linear analysis of composite structures, Composite Structures, Vol. 131, pp. 707-719.

[14] Lee, D.S., Morillo, G., Bugeda, G., Oller, S.,Onate, E. (2013). Robust design optimisation of advance hybrid (fiber–metal) composite structures, Composite Structures, Volume 99, 2013, Pages 181-192. ISSN: 0263-8223

[15] Tserpes K, Kora C. A Multi-Scale Modeling Approach for Simulating Crack Sensing in Polymer Fibrous Composites Using Electrically Conductive Carbon Nanotube Networks. Part II: Meso- and Macro-Scale Analyses. Aerospace, 2018; 5(4):106.

[16] Lin, YE. Functionalized interleaf technology in carbon-fibre-reinforced composites for aircraft applications. National Science Review, 2014, 01, 00: 1-2, 2013. doi: 10.1093/nsr/nwt005.

[17] Guo, Y L, Dong Q, Chen J L, et al. Comparison between temperature and pyrolysis dependent models to evaluate the lightning strike damage of carbon fiber composite laminates. Comp Part A-Appl S, 2017, 97: 10-18.