(Created page with " == Abstract == Two antenna designs are described that are both fully integrated into Fiber Metal Laminate fuselage panels. Full integration in this context means that the an...") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 9: | Line 9: | ||
== Full document == | == Full document == | ||
| − | <pdf>Media: | + | <pdf>Media:Konter_et_al_2020b_3992_p13.pdf</pdf> |
| − | + | ||
== References == | == References == | ||
Latest revision as of 09:39, 5 March 2021
Abstract
Two antenna designs are described that are both fully integrated into Fiber Metal Laminate fuselage panels. Full integration in this context means that the antennas are flush with the fuselage skin on the outside of the aero structure, while maintaining the structural properties of the FML panel. The antennas are designed to resonate at GNSS and at VHF frequency bands. Design considerations are discussed and preliminary results are presented.
Full document
References
[1] K. Yinusa, “A Dual-Band Conformal Antenna for GNSS Applications in Small Cylindrical
Structures,” IEEE Antennas and Wireless Propagation Letters, pp. 1–1, 2018.
[2] W. Hong and K. Sarabandi, “Platform Embedded Slot Antenna Backed by Shielded Parallel Plate Resonator,” IEEE Transactions on Antennas and Propagation, vol. 58, pp. 2850–
2857, Sept. 2010.
[3] N. Behdad and K. Sarabandi, “A wide-band slot antenna design employing a fictitious short circuit concept,” IEEE Transactions on Antennas and Propagation, vol. 53, pp. 475–482, Jan. 2005.
Document information
Published on 15/02/21
Accepted on 03/03/21
Submitted on 03/03/21
DOI: 10.23967/emus.2019.012
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?