(Created page with " == Abstract == WOS: 000256076400008 An important objective of a microirrigation system is to determine the proper operating inlet pressure head, ensuring the desired level...") |
m (Scipediacontent moved page Draft Content 418601730 to Yildirim 2008a) |
(No difference)
|
WOS: 000256076400008
An important objective of a microirrigation system is to determine the proper operating inlet pressure head, ensuring the desired level of water application uniformity as well as the allowable pressure head variation along the multioutlet pipeline. This paper offers, simple, direct, but sufficiently accurate, relationships incorporating different microirrigation uniformity parameters, such as Christiansen uniformity coefficient, coefficient of variation of emitter discharge, and allowable pressure head variation, to determine the operating inlet pressure head (i.e., pressure head and outflow profiles) for multioutlet plastic pipelines. In this analysis some mathematical expressions were deduced to relate three uniformity parameters; then the operating inlet pressure head is simply reformulated by taking into account a multiplying factor alpha to the required average outlet pressure head, in terms of three uniformity parameters. Resulting, the influence of different uniform pipe slopes on the water application uniformity and the operating inlet pressure head for various emitter discharge exponents, was evaluated. In addition, to cover various design combinations an extensive comparison between the proposed equations and those of the previous studies was also presented. Examination of the results from this research indicated that, the performance of the proposed technique is sufficient in comparison to those of the recent analytical and numerical procedures.
The different versions of the original document can be found in:
Published on 01/01/2008
Volume 2008, 2008
DOI: 10.1061/(asce)0733-9437(2008)134:3(341)
Licence: CC BY-NC-SA license
Are you one of the authors of this document?