Latest revision as of 10:35, 15 February 2021

Abstract

In the present work, the metallurgical changes in the welding of clad pipelines are studied. Clad pipes consist of a complex multi-material system, with (i) the clad being stainless steel or a nickel-based superalloy, (ii) the pipe being API X60 or X65 high-strength carbon steel, and (iii) the welding wire being a nickel-based superalloy or stainless steel in the root and hot pass, with a nickel or iron buffer layer, followed by filling with carbon steel wire. Alternatively, the corrosion resistant alloy may be used only. During production of the clad pipe, at the diffusion bonding temperature, substantial material changes may occur. These are carbon diffusion from the carbon steel to the clad, followed by the formation of hard martensite at the interface on cooling. The solidification behavior and microstructure evolution in the weld metal and in the heat-affected zone are further discussed for the different material combinations. Solidification behavior was also numerically estimated to show solidification parameters and resulting solidification modes.

Document type: Article

Full document

Original document

The different versions of the original document can be found in:

• http://dx.doi.org/10.3390/app9153118 under the license https://creativecommons.org/licenses/by

• http://dx.doi.org/10.3390/app9153118 under the license http://creativecommons.org/licenses/by/3.0/

• http://hdl.handle.net/11250/2632498 under the license https://creativecommons.org/licenses/by/4.0

• https://www.mdpi.com/2076-3417/9/15/3118/pdf

• https://sintef.brage.unit.no/sintef-xmlui/handle/11250/2632498,

https://academic.microsoft.com/#/detail/2966519295 under the license cc-by

• https://www.mdpi.com/2076-3417/9/15/3118,

https://doaj.org/toc/2076-3417

• https://www.mdpi.com/2076-3417/9/15/3118/pdf,

http://dx.doi.org/10.3390/app9153118

under the license https://creativecommons.org/licenses/by/4.0/