Latest revision as of 10:33, 15 February 2021

Abstract

    <jats:p> The norms and standards for design of timber bridges, as well as other structures built from this material, were obsolete, design standards that were used dated from 1978 to 1980. The introduction of European Standards has created a new legislative framework in the field of designing and building timber bridges. Currently the design of such constructions use Norm NP 005-2003 and SR EN 1995-1-1: 2004 Eurocode 5: Design of timber structures. Part 1-1: General. Common rules and rules for buildings, SR EN 1995-2: 2005 Eurocode 5: Design of timber structures. Part 2: Bridges, along with their national annexes. The aim of this paper is to analyze the design of the beams for timber bridges in parallel, using on one hand Norm NP 005 - 2003, and on the other hand provisions of European standards. The design requirements for both norms as well as the results of a case study for a structural element of a timber bridge will be presented.

Document type: Article

Full document

Original document

The different versions of the original document can be found in:

• https://content.sciendo.com/downloadpdf/journals/rjti/4/2/article-p1.pdf under the license https://creativecommons.org/licenses/by-nc-nd

• http://content.sciendo.com/view/journals/rjti/4/2/article-p1.xml,

https://www.degruyter.com/view/j/rjti.2015.4.issue-2/rjti-2015-0033/rjti-2015-0033.pdf,

http://dx.doi.org/10.1515/rjti-2015-0033 under the license cc-by-nc-nd

• http://www.degruyter.com/view/j/rjti.2015.4.issue-2/rjti-2015-0033/rjti-2015-0033.xml?format=INT,

https://doaj.org/toc/2286-2218 under the license http://creativecommons.org/licenses/by-nc-nd/4.0

• https://core.ac.uk/display/88050809,

https://academic.microsoft.com/#/detail/2561907238