Latest revision as of 15:06, 12 February 2021

Abstract

This paper presents a thermal investigation of lightweight on-board receiver modules of wireless power transfer systems for electric vehicles. The studied modules are capable of receiving up to 11 kW at a resonance frequency of 85 kHz over a distance of 110–160 mm. The receiver modules were built as sandwich and space–frame concept to design stiff and lightweight structures. The high transmission power of automotive wireless power transfer systems combined with the multi-part assembly of receiver modules led to challenges in heat management. To address this, the physical behaviour of the proposed lightweight concepts were studied on component and system level using a hardware-in-the-loop testing facility for wireless power transfer systems. Special emphasis was laid on the validation of a thermal simulation model, which uses analytical calculated power losses taking into account their temperature dependency. The proposed simulation model is consistent with the experimental validation of the critical active components. The performed systematic studies build the basis for a more sophisticated thermal dimensioning of various constructions for wireless power transfer modules.

Document type: Article

Full document

Original document

The different versions of the original document can be found in:

• https://www.mdpi.com/2032-6653/11/4/67,

https://doaj.org/toc/2032-6653

• https://www.mdpi.com/2032-6653/11/4/67,

https://www.mdpi.com/2032-6653/11/4/67/pdf,

https://academic.microsoft.com/#/detail/3093577081

• https://www.mdpi.com/2032-6653/11/4/67/pdf,

http://dx.doi.org/10.3390/wevj11040067 under the license https://creativecommons.org/licenses/by/4.0/