(Created page with " == Abstract == Failures of Prestressed Concrete Cylinder Pipe (PCCP) throughout North American municipal water transmission systems since the 1970’s has led to the develop...") |
m (Scipediacontent moved page Draft Content 175749493 to Mielke et al 2012a) |
(No difference)
| |
Latest revision as of 21:26, 3 February 2021
Abstract
Failures of Prestressed Concrete Cylinder Pipe (PCCP) throughout North American municipal water transmission systems since the 1970’s has led to the development of a myriad of rehabilitation technologies. Besides removing and replacing full sections of distressed pipe with new pipe, the most widely used method of rehabilitation of PCCP is the structurally independent, Type IV relining of the host pipe with steel cylinders. Referred to as Steel Cylinder Relining or Sliplining, both of these semi-trenchless technologies allow a fully structural renewal of long lengths of PCCP in an economical and expeditious manner. The differences between Relining and Sliplining are discussed from the standpoint of manufacture, flow capacities, design, planning, installation and corrosion protection. The paper also provides a description and comparison of other rehab technologies.
Original document
The different versions of the original document can be found in:
Document information
Published on 01/01/2012
Volume 2012, 2012
DOI: 10.1061/9780784412480.045
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?