Latest revision as of 20:59, 3 February 2021

Abstract

In the mining industry, especially in Chile, tailings impoundment projects are tending to update their thickening technology or improve beach slopes due to environmental concerns, water scarcity, capacity restriction or economic variables. Projects in Chile either being designed or in operation under the concept of high-density tailings do not exceed a yield stress (fully sheared) of approximately 40–50 Pa, and their tailings transport systems may operate in turbulent regimes. There are currently significant research and development projects to improve thickening technology, impoundment deposition strategies and beach slopes management. However, do we have sufficient information and criteria relating to the long distance and large pipeline diameter for the transportation of tailings between the thickening and deposition points for high yield stress requirements? What happens to the transportation of tailings if it must be designed under the concept of high density with a yield stress (fully sheared) above 40–50 Pa but still cannot be considered a paste tailings? Can we expend efforts in thickening and depositing if we do not adequately handle what happens in between (transport)? Generally, for high-density tailings, transportation is designed to operate under the concept of turbulent flow. However, at yield stress above 40–50 Pa, turbulent flow will mean excessive internal wear on the pipelines, due to high velocities and a significant energy demand. What should the criteria be that govern the tailings transport for the high-density zone above 40–50 Pa? Design under turbulent regime or laminar regime? The paper will present an analysis of studies developed to date, identifying and evaluating the variables that govern the design of high-density transport systems within the proposed yield stress ranges. A technical and economic case will be evaluated for a tailings transport project on the proposed yield stress ranges, showing the differences that may exist based on the assumed criteria. The criteria and results of the analysis will be presented in this paper.

Original document

The different versions of the original document can be found in:

• http://dx.doi.org/10.36487/acg_rep/1805_17_yanez

• https://papers.acg.uwa.edu.au/d/1805_17_Yanez/17_Yanez.pdf

• https://papers.acg.uwa.edu.au/p/1805_17_Yanez,

https://papers.acg.uwa.edu.au/d/1805_17_Yanez/17_Yanez.pdf,

https://academic.microsoft.com/#/detail/2800740177