(Created page with " == Abstract == This paper on modeling traffic with mesoscopic models is from the proceedings of 14th international Conference on Urban Transport and the Environment in the 2...") |
m (Scipediacontent moved page Draft Content 576271722 to Brignone Vorraa 2008a) |
(No difference)
| |
Latest revision as of 19:58, 3 February 2021
Abstract
This paper on modeling traffic with mesoscopic models is from the proceedings of 14th international Conference on Urban Transport and the Environment in the 21st Century, which was held in Malta in 2008. The authors describe this new model type and use a new development in the Cube transport planning software package, Cube Avenue, to demonstrate how mesoscopic dynamic traffic assignment models can help model very congested areas to the level of detail required for traffic engineering and area traffic control. With the mesoscopic Cube Avenue program, an extension of the macroscopic planning tool, Cube Voyager, analysts can study problems for which traditional models don’t provide enough data and for which microscopic models provide too much data. One section briefly describes currently ongoing model developments in the U.S., the U.K., Scandinavia, Europe, and Australia, where Cube Avenue is being used to study and optimize area traffic control, to examine blocking effects caused by tolling, and general traffic management and planning issues.
Original document
The different versions of the original document can be found in:
Document information
Published on 01/01/2008
Volume 2008, 2008
DOI: 10.2495/ut080641
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?