(Created page with " == Abstract == Flow assurance is an important aspect of offshore, particularly deepwater pipeline design and operation, since one of the critical issues is the eventual init...")
 
m (Scipediacontent moved page Draft Content 541610371 to Silva et al 2014b)
 
(No difference)

Latest revision as of 07:29, 2 February 2021

Abstract

Flow assurance is an important aspect of offshore, particularly deepwater pipeline design and operation, since one of the critical issues is the eventual initiation and growth of hydrate or paraffin blockages under certain conditions. Ideally, operators would benefit from online information regarding position and extent of an eventual blockage in a pipeline. The aim of this work is to apply acoustic technology to design and make a prototype that can be used in a pipe to efficiently identify and measure blockages. The technique uses a short duration sound pulse that is injected into the pipe. When the acoustic pulse encounters an impedance discontinuity, a portion is reflected back towards the acoustic source and microphones or hydrophones. Analysis of the measured signal reflections can provide valuable data related to location and size of the blockages. An experimental setup with a pipe of 4″ internal diameter and length of 100 m was constructed, and different excitation signals for the impulsive response function measurements were conducted. Microphones and hydrophones measurements were recorded using a fit-for-purpose data acquisition system with sampling rates of up to 1kS/s per channel. The tests were performed in air and water using different sizes of blockages and in different positions in the pipe. In parallel, finite element analyses were performed using the commercial software Abaqus to simulate the same conditions. The experiments were numerically reproduced with good correlation proving the potential of the technique.Copyright © 2014 by ASME


Original document

The different versions of the original document can be found in:

http://dx.doi.org/10.1115/omae2014-23488
https://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1911843,
http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1911843,
https://academic.microsoft.com/#/detail/1999772130
Back to Top

Document information

Published on 01/01/2014

Volume 2014, 2014
DOI: 10.1115/omae2014-23488
Licence: CC BY-NC-SA license

Document Score

0

Views 0
Recommendations 0

Share this document

Keywords

claim authorship

Are you one of the authors of this document?