(Created page with " == Abstract == continuously growing penetration of electric (EV) and hybrid electric (HEV) vehicles, reinforced by the need for increased energy savings, drove th...") |
m (Scipediacontent moved page Draft Content 682444454 to Kyriakidis 2018a) |
(No difference)
|
continuously growing penetration of electric (EV) and hybrid electric (HEV) vehicles, reinforced by the need for increased energy savings, drove the research towards power electronic components with superior material properties. Wide-bandgap (WBG) power semiconductor materials such as Silicon Carbide (SiC) offer significant improvements in power converter’s performance as they allow higher operating voltage, higher switching frequency and higher maximum operating temperature. As a consequence, it is expected to be utilized in traction DC-DC converters where high efficiency, high power density and lower cooling requirements are desired while, simultaneously, achieving significa nt reductions in the total weight and volume of the powertrain. The improved features introduced by SiC MOSFETs on DC-DC converter topologies employed in EVs and HEVs are investigated and experimentally verified. Initially, a non-isolated half-bridge DC-DC converter topology is designed with operating principles that correspond to a converter found on energy management systems of HEVs or fuel cell vehicles. The operating principle of the converter is presented and the bi-directional flow of energy aspect is explained. Subsequently, the design has been modelled and evaluated on a simulation software that considered the operating stages of the converter by also accounting for the gate driving circuit and the predefined cooling requirements. Finally, a test prototype was built in custom-made printed circuit board (PCB) and validated in terms of reliable operation and circuit efficiency. The benefits from utilizing SiC power semiconductors are presented under constant 24 V loading conditions and 80 kHz switching frequency. A constant voltage was maintained through automatically modulating the gate driving signal, whereas an efficiency of around 96% was achieved due to fast switching times introduced by SiC MOSFETs and thus the reduced switching losses. The efficie ncy of the system is dependable on the MOSFET operating performance and therefore an exposure of the transistors in environmental conditions was considered for each individual SiC MOSFET provided by different suppliers. Significant attention has been paid to rapid temperature change, extreme humidity, mechanical vibration and accelerated ageing tests that aim to address possible degradation and defects in the SiC material. The effect of the testing process was examined in component-level, by assessing the electrical characteristics of the SiC MOSFETs, as well as in converter-level by evaluating potential efficiency reductions and operating flaws. Finally, verification of the conditions under which each individual change occurred is of equal importance for prospective improvements in the transistor and converter alike.
The different versions of the original document can be found in:
Published on 01/01/2018
Volume 2018, 2018
Licence: Other
Are you one of the authors of this document?