Latest revision as of 13:27, 26 January 2021

Abstract

The first part of a study of passenger flight experience of Urban Air Mobility was completed. This first part included the design of different Urban Air Mobility vehicle models, in which the passenger flight experience would be quantitatively measured. A first version of a simulator setup, in which the measurements were performed, was also developed. Three concept vehicle models, a single main rotor, a side-by-side rotor and a quadrotor, were designed in the conceptual design software NDARC. The vehicles were electrically propelled with battery technology based on future technology predictions and were designed for autonomous flight with one passenger. The emissions of the vehicles were analyzed and compared with an existing turboshaft helicopter. The interface between NDARC and the flight dynamics analysis and control system software FlightCODE, which was used to create control systems to the NDARC models,  was developed to fit the vehicle configurations considered. The simulator setup was created with a VR headset, the flight simulation software X-Plane, an external autopilot software and stress sensors. Trial runs with the simulator setup were performed and gave important data for the continued development. Planned upgrades of the simulation station were presented and the continuation of the study was discussed.

Original document

The different versions of the original document can be found in:

• http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-399699