(Created page with " == Abstract == This work proposes a calibration procedure to obtain the material parameters required by the Serial/Parallel Mixing Theory for the analysis of composites. A s...") |
m (Jjurado moved page Draft Jurado Granados 914280416 to Jurado Granados et al 2019a) |
(No difference)
| |
Latest revision as of 15:06, 12 May 2020
Abstract
This work proposes a calibration procedure to obtain the material parameters required by the Serial/Parallel Mixing Theory for the analysis of composites. A set of experimental tests are defined to obtain the main composite failure modes. Then, it is proposed to calculate the parameters required by the formulation using the experimental results. The procedure proposed is validated by comparing the numerical results, with those obtained from the experimental campaign. This comparison shows that the Serial/Parallel mixing theory is capable of representing the failure modes of the composite for different loading scenarios as well as the material toughness.
Full document
Document information
Published on 01/01/2019
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?