Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.
Back to Top
Document information
Published on 01/01/2008
DOI: 10.1016/j.cma.2007.06.005
Licence: CC BY-NC-SA license
Web of Science Core Collection® Times cited: 121
Crossref Cited-by Times cited: 126
OpenCitations.net Times cited: 90
OpenCitations.net - Citing documents:
- M. Mier-Torrecilla, S. Idelsohn, E. Oñate. Advances in the simulation of multi-fluid flows with the particle finite element method. Application to bubble dynamics. Int. J. Numer. Meth. Fluids 67(11) (2010) DOI 10.1002/fld.2429
- E. Oñate, P. Nadukandi, S. Idelsohn, J. García, C. Felippa. A family of residual-based stabilized finite element methods for Stokes flows. Int. J. Numer. Meth. Fluids 65(1-3) (2010) DOI 10.1002/fld.2468
- M. Mier-Torrecilla, A. Geyer, J. Phillips, S. Idelsohn, E. Oñate. Numerical simulations of negatively buoyant jets in an immiscible fluid using the Particle Finite Element Method. Int. J. Numer. Meth. Fluids 69(5) (2011) DOI 10.1002/fld.2628
- R. Rossi, A. Larese, P. Dadvand, E. Oñate. An efficient edge-based level set finite element method for free surface flow problems. Int. J. Numer. Meth. Fluids 71(6) (2012) DOI 10.1002/fld.3680
- E. Oñate, A. Franci, J. Carbonell. Lagrangian formulation for finite element analysis of quasi-incompressible fluids with reduced mass losses. Int. J. Numer. Meth. Fluids 74(10) (2014) DOI 10.1002/fld.3870
- S. Idelsohn, J. Marti, P. Becker, E. Oñate. Analysis of multifluid flows with large time steps using the particle finite element method. Int. J. Numer. Meth. Fluids 75(9) (2014) DOI 10.1002/fld.3908
- L. Sun, G. Zhao, J. Zhao. Particle manifold method (PMM): A new continuum-discontinuum numerical model for geomechanics. Int. J. Numer. Anal. Meth. Geomech. 37(12) (2012) DOI 10.1002/nag.2104
- F. Salazar, J. Irazábal, A. Larese, E. Oñate. Numerical modelling of landslide-generated waves with the particle finite element method (PFEM) and a non-Newtonian flow model. Int. J. Numer. Anal. Meth. Geomech. 40(6) (2015) DOI 10.1002/nag.2428
- G. Della Vecchia, M. Cremonesi, F. Pisanò. On the rheological characterisation of liquefied sands through the dam‐breaking test. Int J Numer Anal Methods Geomech 43(7) (2019) DOI 10.1002/nag.2905
- O. Ghaffaripour, G. Esgandani, A. Khoshghalb, B. Shahbodaghkhan. Fully coupled elastoplastic hydro‐mechanical analysis of unsaturated porous media using a meshfree method. Int J Numer Anal Methods Geomech 43(11) (2019) DOI 10.1002/nag.2931
- H. Gomes, P. Pimenta. Embedded Interface with Discontinuous Lagrange Multipliers for Fluid–Structure Interaction Analysis. International Journal for Computational Methods in Engineering Science and Mechanics 16(2) (2015) DOI 10.1080/15502287.2015.1009579
- F. Kempel, B. Schartel, J. Marti, K. Butler, R. Rossi, S. Idelsohn, E. Oñate, A. Hofmann. Modelling the vertical UL 94 test: competition and collaboration between melt dripping, gasification and combustion. Fire Mater. 39(6) (2014) DOI 10.1002/fam.2257
- J. Rodriguez, J. Carbonell, J. Cante, J. Oliver. The particle finite element method (PFEM) in thermo-mechanical problems. Int. J. Numer. Meth. Engng 107(9) (2016) DOI 10.1002/nme.5186
- M. Zhu, M. Scott. Unified fractional step method for Lagrangian analysis of quasi-incompressible fluid and nonlinear structure interaction using the PFEM. Int. J. Numer. Meth. Engng 109(9) (2016) DOI 10.1002/nme.5321
- M. Cerquaglia, G. Deliége, R. Boman, V. Terrapon, J. Ponthot. Free-slip boundary conditions for simulating free-surface incompressible flows through the particle finite element method. Int. J. Numer. Meth. Engng 110(10) (2016) DOI 10.1002/nme.5439
- P. Wriggers. Advanced Discretization Methods for Contact Mechanics. (2018) DOI 10.1007/978-3-319-90155-8_2
- M. Benítez, A. Bermúdez. Second-Order Pure Lagrange--Galerkin Methods for Fluid-Structure Interaction Problems. SIAM J. Sci. Comput. 37(5) DOI 10.1137/141001081
- E. Oñate, R. Rossi, S. Idelsohn, K. Butler. Melting and spread of polymers in fire with the particle finite element method. Int. J. Numer. Meth. Engng DOI 10.1002/nme.2731
- M. Cremonesi, A. Frangi, U. Perego. A Lagrangian finite element approach for the analysis of fluid-structure interaction problems. Int. J. Numer. Meth. Engng. (2010) DOI 10.1002/nme.2911
- E. Oñate, S. Idelsohn, C. Felippa. Consistent pressure Laplacian stabilization for incompressible continua via higher-order finite calculus. Int. J. Numer. Meth. Engng. 87(1-5) (2010) DOI 10.1002/nme.3021
- M. Pastor, A. Chan, P. Mira, D. Manzanal, J. Fernández Merodo, T. Blanc. Computational geomechanics: The heritage of Olek Zienkiewicz. Int. J. Numer. Meth. Engng. 87(1-5) (2011) DOI 10.1002/nme.3192
- F. Mossaiby, R. Rossi, P. Dadvand, S. Idelsohn. OpenCL-based implementation of an unstructured edge-based finite element convection-diffusion solver on graphics hardware. Int. J. Numer. Meth. Engng 89(13) (2011) DOI 10.1002/nme.3302
- E. Oñate, J. García-Espinosa, S. Idelsohn, B. Serván-Camas. Ship Hydrodynamics. (2017) DOI 10.1002/9781119176817.ecm2070
- E. Oñate, F. Bellomo, V. Monteiro, S. Oller, L. Nallim. Characterization of Mechanical Properties of Biological Tissue: Application to the FEM Analysis of the Urinary Bladder. (2013) DOI 10.1002/9781118402955.ch15
- S. Rodolfo Idelsohn, N. Marcelo Nigro, J. Marcelo Gimenez, R. Rossi, J. Marcelo Marti. A fast and accurate method to solve the incompressible Navier‐Stokes equations. Engineering Computations 30(2) DOI 10.1108/02644401311304854
- R. Rossi, S. Idelsohn, E. Oñate, J. Cotela, F. Del Pin. Mejora de la solución fuertemente acoplada de problemas FSI mediante una aproximación de la matriz tangente de presión. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 27(3) DOI 10.1016/j.rimni.2011.07.006
- F. Salazar, E. Oñate, R. Morán. Modelación numérica de deslizamientos de ladera en embalses mediante el Método de Partículas y Elementos Finitos (PFEM). Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 28(2) DOI 10.1016/j.rimni.2012.03.004
- D. Pozo, F. Salazar, M. Toledo. Modelación del funcionamiento hidráulico de los dispositivos de aireación de desagües de fondo de presas mediante el método de partículas y elementos finitos. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 30(1) DOI 10.1016/j.rimni.2012.11.002
- A. Larese. A Lagrangian PFEM approach for non-Newtonian viscoplastic materials. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 33(3-4) DOI 10.1016/j.rimni.2016.07.002
- J. Carbonell, E. Oñate, B. Suárez. Modeling of Ground Excavation with the Particle Finite-Element Method. J. Eng. Mech. 136(4) DOI 10.1061/(asce)em.1943-7889.0000086
- A. Larese, R. Rossi, E. Oñate, M. Toledo, R. Morán, H. Campos. Numerical and Experimental Study of Overtopping and Failure of Rockfill Dams. Int. J. Geomech. 15(4) DOI 10.1061/(asce)gm.1943-5622.0000345
- W. Zhang, W. Yuan, B. Dai. Smoothed Particle Finite-Element Method for Large-Deformation Problems in Geomechanics. Int. J. Geomech. 18(4) DOI 10.1061/(asce)gm.1943-5622.0001079
- E. Oñate, S. Idelsohn, M. Celigueta, B. Suárez. The Particle Finite Element Method (PFEM). An Effective Numerical Technique for Solving Marine, Naval and Harbour Engineering Problems. DOI 10.1007/978-94-007-6143-8_4
- F. Salazar, E. Oñate, R. Morán. Numerical modeling of landslides in reservoirs using the Particle Finite Element Method (PFEM). (2012) DOI 10.1201/b11588-39
- A. Franci. Introduction. (2016) DOI 10.1007/978-3-319-45662-1_1
- A. Franci. Unified Stabilized Formulation for Quasi-incompressible Materials. (2016) DOI 10.1007/978-3-319-45662-1_3
- E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, S. Latorre. Possibilities of the Particle Finite Element Method in Computational Mechanics. DOI 10.1007/978-3-642-05241-5_15
- E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, J. Marti, J. Carbonell, P. Ryzhakov, B. Suárez. Advances in the Particle Finite Element Method (PFEM) for Solving Coupled Problems in Engineering. (2011) DOI 10.1007/978-94-007-0735-1_1
- S. Idelsohn, M. Mier-Torrecilla, J. Marti, E. Oñate. The Particle Finite Element Method for Multi-Fluid Flows. (2011) DOI 10.1007/978-94-007-0735-1_5
- H. Matsubara, S. Iraha, G. Yagawa, D. Song. Some Consideration on Derivative Approximation of Particle Methods. (2011) DOI 10.1007/978-94-007-0735-1_9
- J. Cante, C. Dávalos, J. Hernández, J. Oliver, P. Jonsén, G. Gustafsson, H. Häggblad. PFEM-based modeling of industrial granular flows. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0004-9
- E. Oñate, M. Celigueta, S. Latorre, G. Casas, R. Rossi, J. Rojek. Lagrangian analysis of multiscale particulate flows with the particle finite element method. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0012-9
- T. Zohdi. Embedded electromagnetically sensitive particle motion in functionalized fluids. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0013-8
- T. Tamai, S. Koshizuka. Least squares moving particle semi-implicit method. Comp. Part. Mech. 1(3) (2014) DOI 10.1007/s40571-014-0027-2
- T. Zohdi. Modeling and simulation of the post-impact trajectories of particles in oblique precision shot-peening. Comp. Part. Mech. 3(4) (2015) DOI 10.1007/s40571-015-0048-5
- M. Celigueta, K. Deshpande, S. Latorre, E. Oñate. A FEM-DEM technique for studying the motion of particles in non-Newtonian fluids. Application to the transport of drill cuttings in wellbores. Comp. Part. Mech. 3(2) (2015) DOI 10.1007/s40571-015-0090-3
- F. Salazar, J. San-Mauro, M. Celigueta, E. Oñate. Air demand estimation in bottom outlets with the particle finite element method. Comp. Part. Mech. 4(3) (2016) DOI 10.1007/s40571-016-0117-4
- T. Zohdi. On high-frequency radiation scattering sensitivity to surface roughness in particulate media. Comp. Part. Mech. 4(1) (2016) DOI 10.1007/s40571-016-0118-3
- J. Rodríguez, P. Jonsén, A. Svoboda. Simulation of metal cutting using the particle finite-element method and a physically based plasticity model. Comp. Part. Mech. 4(1) (2016) DOI 10.1007/s40571-016-0120-9
- A. Franci, M. Cremonesi. On the effect of standard PFEM remeshing on volume conservation in free-surface fluid flow problems. Comp. Part. Mech. 4(3) (2016) DOI 10.1007/s40571-016-0124-5
- F. Salazar, J. San-Mauro, M. Celigueta, E. Oñate. Shockwaves in spillways with the particle finite element method. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00252-1
- R. Bravo, P. Ortiz, S. Idelsohn, P. Becker. Sediment transport problems by the particle finite element method (PFEM). Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00255-y
- G. Fourey, G. Oger, D. Touzé, B. Alessandrini. Violent Fluid-Structure Interaction simulations using a coupled SPH/FEM method. IOP Conf. Ser.: Mater. Sci. Eng. 10 (2010) DOI 10.1088/1757-899x/10/1/012041
- T. Zohdi, N. Castrillon. Variability of Targeted Material Thermal Responses to Laser-Induced Heating in Additive Manufacturing. 141(8) (2019) DOI 10.1115/1.4043981
- T. Zohdi. A direct particle-based computational framework for electrically enhanced thermo-mechanical sintering of powdered materials. Mathematics and Mechanics of Solids 19(1) (2013) DOI 10.1177/1081286513505472
- E. Oñate, A. Franci, J. Carbonell. A Particle Finite Element Method (PFEM) for Coupled Thermal Analysis of Quasi and Fully Incompressible Flows and Fluid-Structure Interaction Problems. (2014) DOI 10.1007/978-3-319-06136-8_6
- F. Salazar, R. Morán, R. Rossi, E. Oñate. Analysis of the discharge capacity of radial-gated spillways using CFD and ANN – Oliana Dam case study. Journal of Hydraulic Research 51(3) (2013) DOI 10.1080/00221686.2012.755714
- T. Oliveira, A. Sanchez-Arcilla, X. Gironella, O. Madsen. On the generation of regular long waves in numerical wave flumes based on the particle finite element method. Journal of Hydraulic Research 55(4) (2017) DOI 10.1080/00221686.2016.1275047
- T. Zohdi. DEM Extensions: Acoustical Pre-Processing. (2017) DOI 10.1007/978-3-319-70079-3_11
- T. Zohdi. CM Approaches: Numerical Thermo-Mechanical Formulations. (2017) DOI 10.1007/978-3-319-70079-3_5
- T. Zohdi. PART II—Discrete Element Method (DEM) Approaches: Dynamic Powder Deposition. (2017) DOI 10.1007/978-3-319-70079-3_6
- T. Zohdi. DEM Extensions: Flexible Substrate Models. (2017) DOI 10.1007/978-3-319-70079-3_9
- T. Oliveira, A. Sánchez-Arcilla, X. Gironella. Simulation of Wave Overtopping of Maritime Structures in a Numerical Wave Flume. Journal of Applied Mathematics 2012 DOI 10.1155/2012/246146
- T. Zohdi. Mechanically driven accumulation of microscale material at coupled solid–fluid interfaces in biological channels. J. R. Soc. Interface 11(91) (2014) DOI 10.1098/rsif.2013.0922
- T. Zohdi. On firework blasts and qualitative parameter dependency. Proc. R. Soc. A 472(2185) (2016) DOI 10.1098/rspa.2015.0720
- O. Eugenio. Finite increment calculus (FIC): a framework for deriving enhanced computational methods in mechanics. Adv. Model. and Simul. in Eng. Sci. 3(1) (2016) DOI 10.1186/s40323-016-0065-9
- M. Benítez, A. Bermúdez, P. Fontán. A Second-Order Linear Newmark Method for Lagrangian Navier-Stokes Equations. (2018) DOI 10.1007/978-3-319-97613-6_3
- K. Soga, E. Alonso, A. Yerro, K. Kumar, S. Bandara. Trends in large-deformation analysis of landslide mass movements with particular emphasis on the material point method. Géotechnique 66(3) DOI 10.1680/jgeot.15.lm.005
- P. Dadvand, R. Rossi, E. Oñate. An Object-oriented Environment for Developing Finite Element Codes for Multi-disciplinary Applications. Arch Computat Methods Eng 17(3) (2010) DOI 10.1007/s11831-010-9045-2
- J. Degroote. Partitioned Simulation of Fluid-Structure Interaction. Arch Computat Methods Eng 20(3) (2013) DOI 10.1007/s11831-013-9085-5
- T. Zohdi. Rapid Simulation of Laser Processing of Discrete Particulate Materials. Arch Computat Methods Eng 20(4) (2013) DOI 10.1007/s11831-013-9092-6
- T. Zohdi. Modeling and Simulation of Laser Processing of Particulate-Functionalized Materials. Arch Computat Methods Eng 24(1) (2015) DOI 10.1007/s11831-015-9160-1
- C. Felippa, E. Oñate, S. Idelsohn. Variational Framework for FIC Formulations in Continuum Mechanics: High Order Tensor-Derivative Transformations and Invariants. Arch Computat Methods Eng 25(4) (2017) DOI 10.1007/s11831-017-9245-0
- J. Rodríguez, J. Carbonell, P. Jonsén. Numerical Methods for the Modelling of Chip Formation. Arch Computat Methods Eng 27(2) (2018) DOI 10.1007/s11831-018-09313-9
- T. Wang, R. Wüchner, K. Bletzinger. Assessment and practical application of mapping algorithms for beam elements in computational FSI. European Journal of Computational Mechanics 25(5) (2016) DOI 10.1080/17797179.2016.1249732
- P. Ryzhakov, R. Rossi, S. Idelsohn, E. Oñate. A monolithic Lagrangian approach for fluid–structure interaction problems. Comput Mech 46(6) (2010) DOI 10.1007/s00466-010-0522-0
- E. Oñate, M. Celigueta, S. Idelsohn, F. Salazar, B. Suárez. Possibilities of the particle finite element method for fluid–soil–structure interaction problems. Comput Mech 48(3) (2011) DOI 10.1007/s00466-011-0617-2
- A. Larese, R. Rossi, E. Oñate, S. Idelsohn. A coupled PFEM–Eulerian approach for the solution of porous FSI problems. Comput Mech 50(6) (2012) DOI 10.1007/s00466-012-0768-9
- K. Kamran, R. Rossi, E. Oñate. A contact algorithm for shell problems via Delaunay-based meshing of the contact domain. Comput Mech 52(1) (2012) DOI 10.1007/s00466-012-0791-x
- J. Carbonell, E. Oñate, B. Suárez. Modelling of tunnelling processes and rock cutting tool wear with the particle finite element method. Comput Mech 52(3) (2013) DOI 10.1007/s00466-013-0835-x
- P. Wriggers, J. Schröder, A. Schwarz. A finite element method for contact using a third medium. Comput Mech 52(4) (2013) DOI 10.1007/s00466-013-0848-5
- T. Zohdi. Additive particle deposition and selective laser processing-a computational manufacturing framework. Comput Mech 54(1) (2014) DOI 10.1007/s00466-014-1012-6
- E. Oñate, A. Franci, J. Carbonell. A particle finite element method for analysis of industrial forming processes. Comput Mech 54(1) (2014) DOI 10.1007/s00466-014-1016-2
- X. Zhang, K. Krabbenhoft, D. Sheng, W. Li. Numerical simulation of a flow-like landslide using the particle finite element method. Comput Mech 55(1) (2014) DOI 10.1007/s00466-014-1088-z
- C. Weißenfels, P. Wriggers. A contact layer element for large deformations. Comput Mech 55(5) (2015) DOI 10.1007/s00466-015-1140-7
- T. Zohdi. Modeling and simulation of cooling-induced residual stresses in heated particulate mixture depositions in additive manufacturing. Comput Mech 56(4) (2015) DOI 10.1007/s00466-015-1191-9
- T. Zohdi. A discrete element and ray framework for rapid simulation of acoustical dispersion of microscale particulate agglomerations. Comput Mech 57(3) (2016) DOI 10.1007/s00466-015-1250-2
- T. Zohdi. Modeling and rapid simulation of the propagation and multiple branching of electrical discharges in gaseous atmospheres. Comput Mech 60(3) (2017) DOI 10.1007/s00466-017-1414-3
- J. Rodriguez Prieto, J. Carbonell, J. Cante, J. Oliver, P. Jonsén. Generation of segmental chips in metal cutting modeled with the PFEM. Comput Mech 61(6) (2017) DOI 10.1007/s00466-017-1442-z
- T. Zohdi. Modeling the spatio-thermal fire hazard distribution of incandescent material ejecta in manufacturing. Comput Mech 63(4) (2018) DOI 10.1007/s00466-018-1617-2
