Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.
Back to Top
Document information
Published on 01/01/2013
DOI: 10.1016/j.compstruc.2012.12.006
Licence: CC BY-NC-SA license
Web of Science Core Collection® Times cited: 36
Crossref Cited-by Times cited: 42
OpenCitations.net Times cited: 29
OpenCitations.net - Citing documents:
- X. Yang, W. Feng, W. Li, Y. Xu, Q. Chu, T. Ma, W. Wang. Numerical modelling and experimental investigation of thermal and material flow in probeless friction stir spot welding process of Al 2198-T8. Science and Technology of Welding and Joining 23(8) (2018) DOI 10.1080/13621718.2018.1469832
- S. Vendan, M. Natesh, A. Garg, L. Gao. Polymer Welding Techniques and Its Evolution. (2018) DOI 10.1007/978-981-13-0626-6_2
- P. Bussetta, R. Boman, J. Ponthot. Efficient 3D data transfer operators based on numerical integration. Int. J. Numer. Meth. Engng 102(3-4) (2014) DOI 10.1002/nme.4821
- P. Bussetta, N. Dialami, R. Boman, M. Chiumenti, C. Agelet de Saracibar, M. Cervera, J. Ponthot. Comparison of a Fluid and a Solid Approach for the Numerical Simulation of Friction Stir Welding with a Non-Cylindrical Pin. steel research int. 85(6) (2013) DOI 10.1002/srin.201300182
- P. Bussetta, N. Dialami, M. Chiumenti, C. Agelet de Saracibar, M. Cervera, J. Ponthot. 3D numerical models of FSW processes with non-cylindrical pin. Advances in Materials and Processing Technologies 1(3-4) (2016) DOI 10.1080/2374068x.2015.1121035
- N. Dialami, M. Cervera, M. Chiumenti, C. de Saracibar. Local–global strategy for the prediction of residual stresses in FSW processes. Int J Adv Manuf Technol 88(9-12) (2016) DOI 10.1007/s00170-016-9016-3
- M. Bachmann, J. Carstensen, L. Bergmann, J. dos Santos, C. Wu, M. Rethmeier. Numerical simulation of thermally induced residual stresses in friction stir welding of aluminum alloy 2024-T3 at different welding speeds. Int J Adv Manuf Technol 91(1-4) (2016) DOI 10.1007/s00170-016-9793-8
- S. Pereyra, G. Lombera, S. Urquiza. Modelado numérico del proceso de soldadura FSW incorporando una técnica de estimación de parámetros. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 30(3) DOI 10.1016/j.rimni.2013.04.007
- A. Alavi Nia, A. Shirazi. An investigation into the effect of welding parameters on fatigue crack growth rate and fracture toughness in friction stir welded copper sheets. Proceedings of the IMechE 232(3) (2015) DOI 10.1177/1464420715620918
- Z. Zhu, M. Wang, H. Zhang, X. Zhang, T. Yu, Z. Wu. A Finite Element Model to Simulate Defect Formation during Friction Stir Welding. Metals 7(7) (2017) DOI 10.3390/met7070256
- B. Meyghani, M. Awang, S. Emamian, M. Mohd Nor, S. Pedapati. A Comparison of Different Finite Element Methods in the Thermal Analysis of Friction Stir Welding (FSW). Metals 7(10) (2017) DOI 10.3390/met7100450
- N. Dialami, M. Cervera, M. Chiumenti, A. Segatori, W. Osikowicz. Experimental Validation of an FSW Model with an Enhanced Friction Law: Application to a Threaded Cylindrical Pin Tool. Metals 7(11) (2017) DOI 10.3390/met7110491
- K. Fraser, L. Kiss, L. St-Georges, D. Drolet. Optimization of Friction Stir Weld Joint Quality Using a Meshfree Fully-Coupled Thermo-Mechanics Approach. Metals 8(2) (2018) DOI 10.3390/met8020101
- Narges Dialami, Miguel Cervera, Michele Chiumenti. Numerical Modelling of Microstructure Evolution in Friction Stir Welding (FSW). Metals 8(3) (2018) DOI 10.3390/met8030183
- N. Dialami, M. Cervera, M. Chiumenti. Effect of the Tool Tilt Angle on the Heat Generation and the Material Flow in Friction Stir Welding. Metals 9(1) (2018) DOI 10.3390/met9010028
- C. Agelet De Saracibar. Challenges to Be Tackled in the Computational Modeling and Numerical Simulation of FSW Processes. Metals 9(5) (2019) DOI 10.3390/met9050573
- I. Iaconeta, A. Larese, R. Rossi, Z. Guo. Comparison of a Material Point Method and a Galerkin Meshfree Method for the Simulation of Cohesive-Frictional Materials. Materials 10(10) (2017) DOI 10.3390/ma10101150
- B. Meyghani, M. Awang, S. Emamian, N. Khalid. Developing a Finite Element Model for Thermal Analysis of Friction Stir Welding by Calculating Temperature Dependent Friction Coefficient. (2017) DOI 10.1007/978-981-10-4232-4_9
- X. He. Numerical Studies on Friction Stir Welding of Lightweight Materials. AMR 743 (2013) DOI 10.4028/www.scientific.net/amr.743.118
- N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar, J. Ponthot. Material flow visualization in Friction Stir Welding via particle tracing. Int J Mater Form 8(2) (2013) DOI 10.1007/s12289-013-1157-4
- N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar, J. Ponthot, P. Bussetta. Numerical Simulation and Visualization of Material Flow in Friction Stir Welding via Particle Tracing. (2014) DOI 10.1007/978-3-319-06136-8_7
- B. Meyghani, M. Awang, M. Momeni, M. Rynkovskaya. Development of a Finite Element Model for Thermal Analysis of Friction Stir Welding (FSW). IOP Conf. Ser.: Mater. Sci. Eng. 495 (2019) DOI 10.1088/1757-899x/495/1/012101
- B. Shahedi, M. Damircheli, A. Shirazi. Experimental investigation of the effects of welding parameters and TiO2 nanoparticles addition on FSWed copper sheets. Mater. Res. Express 6(2) (2018) DOI 10.1088/2053-1591/aaeb5b
- P. Bussetta, N. Dialami, M. Chiumenti, C. Agelet de Saracibar, M. Cervera, R. Boman, J. Ponthot. 3D numerical models using a fluid or a solid formulation of FSW processes with a non-cylindrical pin. Adv. Model. and Simul. in Eng. Sci. 2(1) (2015) DOI 10.1186/s40323-015-0048-2
- D. Andrade, C. Leitão, N. Dialami, M. Chiumenti, D. Rodrigues. Thermomechanical analysis of the friction stir welding process. DOI 10.1063/1.5112567
- C. de Saracibar, M. Chiumenti, M. Cervera, N. Dialami, A. Seret. Computational Modeling and Sub-Grid Scale Stabilization of Incompressibility and Convection in the Numerical Simulation of Friction Stir Welding Processes. Arch Computat Methods Eng 21(1) (2014) DOI 10.1007/s11831-014-9094-z
- N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar. Challenges in Thermo-mechanical Analysis of Friction Stir Welding Processes. Arch Computat Methods Eng 24(1) (2016) DOI 10.1007/s11831-015-9163-y
- S. Lambrakos. Inverse Thermal Analysis of Ti-6Al-4V Friction Stir Welds Using Numerical-Analytical Basis Functions with Pseudo-Advection. J. of Materi Eng and Perform 27(6) (2018) DOI 10.1007/s11665-018-3377-8
- S. Lambrakos. Parametric Modeling of AZ31-Mg Alloy Friction Stir Weld Temperature Histories. J. of Materi Eng and Perform 27(11) (2018) DOI 10.1007/s11665-018-3716-9
Share this document
Keywords
claim authorship
Are you one of the authors of this document?