Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.
Back to Top
Document information
Published on 01/01/1999
DOI: 10.1108/13552549910251846
Licence: CC BY-NC-SA license
Web of Science Core Collection® Times cited: 94
Crossref Cited-by Times cited: 89
OpenCitations.net Times cited: 52
OpenCitations.net - Citing documents:
- R. Li, Y. Shi, J. Liu, H. Yao, W. Zhang. Effects of processing parameters on the temperature field of selective laser melting metal powder. Powder Metall Met Ceram 48(3-4) (2009) DOI 10.1007/s11106-009-9113-z
- A. Sandmann, C. Notthoff, M. Winterer. Continuous wave ultraviolet-laser sintering of ZnO and TiO2 nanoparticle thin films at low laser powers. Journal of Applied Physics 113(4) DOI 10.1063/1.4788906
- E. Bassoli, A. Gatto, L. Iuliano, E. Atzeni. Characterisation of innovative materials for Direct Laser Sintering. MRS Proc. 860 (2011) DOI 10.1557/proc-860-ll4.7
- C. Teng, K. Ashby, N. Phan, D. Pal, B. Stucker. The effects of material property assumptions on predicted meltpool shape for laser powder bed fusion based additive manufacturing. Meas. Sci. Technol. 27(8) (2016) DOI 10.1088/0957-0233/27/8/085602
- R. Kakhramanov, A. Knyazeva, L. Rabinskiy, Y. Solyaev. On the possibility of steady-state solutions application to describe a thermal state of parts fabricated by selective laser sintering. High Temp 55(5) (2017) DOI 10.1134/s0018151x1705008x
- E. Neiva, S. Badia, A. Martín, M. Chiumenti. A scalable parallel finite element framework for growing geometries. Application to metal additive manufacturing. Int J Numer Methods Eng 119(11) (2019) DOI 10.1002/nme.6085
- D. Pal, C. Teng, B. Stucker. Simulation of Powder-Based Additive Manufacturing Processes. (2015) DOI 10.1201/b19360-9
- V. Skliarov, P. Neyezhmakov, A. Prokopov. Metrological assurance and traceability for Industry 4.0 and additive manufacturing in Ukraine. DOI 10.1117/12.2292821
- C. Körner, A. Bauereiß, E. Attar. Fundamental consolidation mechanisms during selective beam melting of powders. Modelling Simul. Mater. Sci. Eng. 21(8) (2013) DOI 10.1088/0965-0393/21/8/085011
- K. Dai, L. Shaw. Finite-element analysis of effects of the laser-processed bimaterial component size on stresses and distortion. Metall and Mat Trans A 34(5) DOI 10.1007/s11661-003-0133-x
- L. Kholpanov, S. Zakiev, I. Shishkovskii. Modeling of thermal processes in laser sintering of reactive powder compositions. J Eng Phys Thermophys 78(6) DOI 10.1007/s10891-006-0038-9
- X. Tian, B. Sun, J. Heinrich, D. Li. Scan pattern, stress and mechanical strength of laser directly sintered ceramics. Int J Adv Manuf Technol 64(1-4) (2012) DOI 10.1007/s00170-012-3994-6
- A. Garg, J. Lam, M. Savalani. A new computational intelligence approach in formulation of functional relationship of open porosity of the additive manufacturing process. Int J Adv Manuf Technol 80(1-4) (2015) DOI 10.1007/s00170-015-6989-2
- E. Kundakcioglu, I. Lazoglu, S. Rawal. Transient thermal modeling of laser-based additive manufacturing for 3D freeform structures. Int J Adv Manuf Technol 85(1-4) (2015) DOI 10.1007/s00170-015-7932-2
- L. Papadakis, D. Chantzis, K. Salonitis. On the energy efficiency of pre-heating methods in SLM/SLS processes. Int J Adv Manuf Technol 95(1-4) (2017) DOI 10.1007/s00170-017-1287-9
- L. Bertini, F. Bucchi, F. Frendo, M. Moda, B. Monelli. Residual stress prediction in selective laser melting. Int J Adv Manuf Technol 105(1-4) (2019) DOI 10.1007/s00170-019-04091-5
- D. Rouholamin, N. Hopkinson. An investigation on the suitability of micro-computed tomography as a non-destructive technique to assess the morphology of laser sintered nylon 12 parts. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228(12) (2014) DOI 10.1177/0954405414522209
- V. Vijayaraghavan, A. Garg, C. Wong, K. Tai, S. Regalla, M. Tsai. Density characteristics of laser-sintered three-dimensional printing parts investigated by using an integrated finite element analysis–based evolutionary algorithm approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230(1) (2014) DOI 10.1177/0954405414558131
- A. Mazzoli. Selective laser sintering in biomedical engineering. Med Biol Eng Comput 51(3) (2012) DOI 10.1007/s11517-012-1001-x
- L. Dong, A. Makradi, S. Ahzi, Y. Remond, X. Sun. Simulation of the densification of semicrystalline polymer powders during the selective laser sintering process: Application to Nylon 12. Polym. Sci. Ser. A 50(6) (2008) DOI 10.1134/s0965545x0806014x
- S. Zakiev, L. Kholpanov, I. Shishkovsky, I. Parkin, M. Kuznetsov, Y. Morozov. Modelling of the thermal processes that occur during laser sintering of reacting powder compositions. Appl. Phys. A 84(1-2) (2006) DOI 10.1007/s00339-006-3586-0
- F. Liu, J. Chen, Q. Zhang, P. Lv. Modelling of the formation of the porous structure by selective laser sintering. DOI 10.2351/1.5057221
- A. Kaplan, J. Frostevarg. High speed imaging of powder incorporation into the melt pool in LAM. DOI 10.2351/1.5118551
- E. Mirkoohi, D. Seivers, H. Garmestani, S. Liang. Heat Source Modeling in Selective Laser Melting. Materials 12(13) (2019) DOI 10.3390/ma12132052
- L. Shaw. Thermal Stress Modeling in Multi-Material Laser Processing. DOI 10.1007/978-94-007-2739-7_18
- S. Singh, A. Sachdeva, V. Sharma. Optimization of selective laser sintering process parameters to achieve the maximum density and hardness in polyamide parts. Prog Addit Manuf 2(1-2) (2017) DOI 10.1007/s40964-017-0020-4
- A. Garg, J. Lam, M. Savalani. A New Variant of Genetic Programming in Formulation of Laser Energy Consumption Model of 3D Printing Process. (2016) DOI 10.1007/978-981-10-0549-7_3
- Q. Liu, M. Leu. Finite Element Analysis of Solidification in Rapid Freeze Prototyping. 129(4) (2007) DOI 10.1115/1.2738095
- A. Gusarov, I. Yadroitsev, P. Bertrand, I. Smurov. Model of Radiation and Heat Transfer in Laser-Powder Interaction Zone at Selective Laser Melting. 131(7) (2009) DOI 10.1115/1.3109245
- J. Irwin, P. Michaleris. A Line Heat Input Model for Additive Manufacturing. 138(11) (2016) DOI 10.1115/1.4033662
- A. Gobal, B. Ravani. Physical Modeling for Selective Laser Sintering Process. 17(2) (2017) DOI 10.1115/1.4034473
- A. Yuksel, E. Yu, J. Murthy, M. Cullinan. Effect of Substrate and Nanoparticle Spacing on Plasmonic Enhancement in Three-Dimensional Nanoparticle Structures. 5(4) (2017) DOI 10.1115/1.4037770
- A. Tontowi, T. Childs. Density prediction of crystalline polymer sintered parts at various powder bed temperatures. Rapid Prototyping Journal 7(3) DOI 10.1108/13552540110395637
- K. Dai, L. Shaw. Distortion minimization of laser‐processed components through control of laser scanning patterns. Rapid Prototyping Journal 8(5) DOI 10.1108/13552540210451732
- N. Tolochko, M. Arshinov, A. Gusarov, V. Titov, T. Laoui, L. Froyen. Mechanisms of selective laser sintering and heat transfer in Ti powder. Rapid Prototyping Journal 9(5) DOI 10.1108/13552540310502211
- B. Asiabanpour, R. Cano, C. Subbareddy, F. Wasik, L. VanWagner, T. McCormick. A new heater design by radiation modeling and a new polymer waste‐saving mechanism design for the SIS process. Rapid Prototyping Journal 13(3) DOI 10.1108/13552540710750889
- G. Berti, L. D'Angelo, A. Gatto, L. Iuliano. Mechanical characterisation of PA‐Al2O3 composites obtained by selective laser sintering. Rapid Prototyping Journal 16(2) DOI 10.1108/13552541011025843
- A. Singh, R. Srinivasa Prakash. Response surface‐based simulation modeling for selective laser sintering process. Rapid Prototyping Journal 16(6) DOI 10.1108/13552541011083362
- A. Singh, R. Srinivasa Prakash. DOE based three‐dimensional finite element analysis for predicting density of a laser‐sintered part. Rapid Prototyping Journal 16(6) DOI 10.1108/13552541011083380
- E. Bassoli, A. Gatto, L. Iuliano. Joining mechanisms and mechanical properties of PA composites obtained by selective laser sintering. Rapid Prototyping Journal 18(2) DOI 10.1108/13552541211212087
- A. Garg, K. Tai, M. Savalani. State-of-the-art in empirical modelling of rapid prototyping processes. Rapid Prototyping Journal 20(2) DOI 10.1108/rpj-08-2012-0072
- M. Chiumenti, X. Lin, M. Cervera, W. Lei, Y. Zheng, W. Huang. Numerical simulation and experimental calibration of additive manufacturing by blown powder technology. Part I: thermal analysis. Rapid Prototyping Journal 23(2) DOI 10.1108/rpj-10-2015-0136
- P. Wei, Z. Wei, Z. Chen, J. Du, Y. He, J. Li. Fundamentals of radiation heat transfer in AlSi10Mg powder bed during selective laser melting. RPJ 25(9) DOI 10.1108/rpj-11-2016-0189
- T. Childs, A. Tontowi. Selective laser sintering of a crystalline and a glass-filled crystalline polymer: Experiments and simulations. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 215(11) (2006) DOI 10.1243/0954405011519330
- J. Crookston, A. Long, G. Bingham, R. Hague. Finite-element modelling of mechanical behaviour of rapid manufactured textiles. Proceedings of the IMechE 222(1) (2008) DOI 10.1243/14644207jmda161
- J. Wang, M. Yang, Y. Zhang. A Nonequilibrium Thermal Model for Direct Metal Laser Sintering. Numerical Heat Transfer, Part A: Applications 67(3) (2014) DOI 10.1080/10407782.2014.923231
- J. Nandy, H. Sarangi, S. Sahoo. A Review on Direct Metal Laser Sintering: Process Features and Microstructure Modeling. Lasers Manuf. Mater. Process. 6(3) (2019) DOI 10.1007/s40516-019-00094-y
- I. Kinstlinger, A. Bastian, S. Paulsen, D. Hwang, A. Ta, D. Yalacki, T. Schmidt, J. Miller. Open-Source Selective Laser Sintering (OpenSLS) of Nylon and Biocompatible Polycaprolactone. PLoS ONE 11(2) (2016) DOI 10.1371/journal.pone.0147399
- K. Zeng, D. Pal, H. Gong, N. Patil, B. Stucker. Comparison of 3DSIM thermal modelling of selective laser melting using new dynamic meshing method to ANSYS. Materials Science and Technology 31(8) (2014) DOI 10.1179/1743284714y.0000000703
- M. Mani, B. Lane, M. Donmez, S. Feng, S. Moylan. A review on measurement science needs for real-time control of additive manufacturing metal powder bed fusion processes. International Journal of Production Research 55(5) (2016) DOI 10.1080/00207543.2016.1223378
- S. Andrade, A. Jardini, M. Wolf Maciel, R. Maciel Filho. Numerical simulation of localized cure of thermosensitive resin during thermo stereolithography process (TSTL). J. Appl. Polym. Sci. 102(3) (2006) DOI 10.1002/app.24456
- S. Kumar. Selective laser sintering: A qualitative and objective approach. JOM 55(10) DOI 10.1007/s11837-003-0175-y
Share this document
Keywords
claim authorship
Are you one of the authors of this document?