Ligthweigth and heavy-duty instrumented, servo assisted dynamic cone penetrometers for shallow soil characterisation

                                
==Abstract==

Based on the principle of the Panda® penetrometer, a third-generation of variable-energy dynamic cone penetrometer has been developed in France: the Panda 3(1). This is an instrumented dynamic penetrometer which, by measuring strain, acceleration, and displacement on the rods, close to the anvil, and then decoupling the deformation waves created by the impact and propagating within the rods during penetration, makes it possible to obtain for each blow, at the soil/cone interface, a dynamic load penetration curve, called DCLT curve. Several experimental and numerical studies have been carried out to develop different techniques for processing DCLT curves and dynamic signals to assess input energy, dynamic and pseudo static cone resistance, dynamic stiffness, elastic modulus, and compressional wave velocities of soil. This technique has been adapted to the DPSH cone penetrometer (ISO 22476-2), for which it was necessary to servoassisted the impact force as a function of the soil penetration obtained after each blow to improve then the quality of the signals and DCLT curves obtained. Recently, in France, a vast experimental program involving two universities and two geotechnical companies was carried out to develop this new technique. A large laboratory and in-situ test data base was performed. After a brief presentation of the theoretical and technological development of this new technique is presented.

== Full Paper ==
<pdf>Media:Draft_Sanchez Pinedo_834774287264.pdf</pdf>