J. Raventos*
International standards for monitoring under ISO have been under development since 2010 and the intentions were presented during the 8th International Symposium on Field Monitoring in Geomechanics (FMGM 2011) in Berlin. Progress on this project was reported at FMGM 2015 in Sydney and ISFMG 2022 in London. The base standard on general rules was published in 2015, part 2, the standard on extensometers, in 2016 and in 2017 the third part on inclinometers. Part 4 on piezometers was published in 2020, Part 5 on pressure cells in 2019 and Part 8 on load cells in 2023. These standards have been published as ISO Standards in English and French worldwide. In Europe the standards have been published under EN ISO 18674 member countries of CEN have to publish these standards in their country. The standards on settlement measurements by hydraulic systems (part 6), geodetic measurements (part 9) and strain measurement (part 7) are under development and will be submitted to enquiry in the next few months.
Keywords:
Return to Raventos* 2024a.
Published on 07/06/24Submitted on 07/06/24
Volume Field monitoring in geomechanics, 2024DOI: 10.23967/isc.2024.002Licence: CC BY-NC-SA license
Views 0Recommendations 0
Are you one of the authors of this document?