Use of geosynthetics to close a contaminated area in a metallurgical industry in the state of bahia

                                
==Abstract==

The study for closure and monitored natural attenuation/stabilization of industrial waste deposits plays a fundamental role in the process of groundwater quality management, providing information for understanding the contaminants evolution and enabling decision-making, with the purpose of isolating waste, contaminant concentrations, toxicity and mass and/or volume reduction to levels adequate to protect human health and the environment, within a reasonable period of time. The aim of this study was to propose an environmental remediation solution for a contaminated material disposal area using the case study of a metallurgical industry located in Bahia, Brazil. To this purpose, four conditions were provided for compliance: i) control of dust, odor and erosion, ii) control of contaminant release, iii) chemical stabilization of waste and iv) soil recovery. Based on the results obtained in environmental investigation studies and information from the area, the best solution in an attempt to naturally stabilize the area would be the use of geosynthetics as a physical barrier between the contaminated material disposed in the area and the rainwater. In this way, infiltration of rainwater into the landfill and the migration of percolated liquid with risk of contamination to the soil, groundwater table and surface water bodies is avoided. It is still possible to monitor the effectiveness of the proposed solution with the installation of instrumentation such as water level indicators and piezometers.

== Full Paper ==
<pdf>Media:Draft_Sanchez Pinedo_716976073280.pdf</pdf>