VHF Antenna Integrated into a Classical Fibre Metal Laminate Fuselage Panel


== Abstract ==

Replacement of protruding antennas by integrated alternatives will reduce the energy consumption and <math>NO_x</math> and <math>CO_2</math> emissions of an aircraft. This paper proposes and integrated VHF cavity backed slot antenna that is suitable to replace blade antennas. To reduce the size of the cavity a parallel plate resonator is used. The slot is integrated into a fibre metal laminate fuselage panel. A bookleafing principle is used to reinforce the panel at the position of the slot, making sure the material quality is not reduced. Measurement results of a demonstrator antenna show the feasibility of the proposed antenna. Moreover, the paper discusses several electromagnetic and structural design trade-offs for this integrated antenna.

== Full document ==
<pdf>Media:Draft_Content_249663902-P_IDC5_30-6716-document.pdf</pdf>


== References ==

[1] D. Sievenpiper, L. Zhang, R.F. Jimenez Broas, N.G. Alexópolous, E. Yablonovitch, “High-impedance electromagnetic surfaces with a forbidden frequency band”, ''IEEE Trans. on Antennas and Prop''. (1999), '''47''' (11): 2059-2074.

[2] J. Joubert, J.C. Vardaxoglou, W.G. Whittow and J.W. Odendaal, “CPW-fed cavity-backed slot radiator loaded with an AMC reflector”,'' IEEE Trans. on Antennas and Prop''. (2012), '''60''' (2): 735-742.

[3] H. Malekpoor and S. Jam, “Improved radiation performance of low profile printed slot antenna using wideband planar AMC surface”, ''IEEE Trans. on Antennas and Prop.'' (2016), '''64''' (11): 4626-4638.

[4] J. Li, H. Shi and A. Zhang, “Unidirectional circularly polarized slot antenna backed with miniaturized AMC reflector''”, IEEE Int. Symp. on Antennas and Prop. & USNC/URSINat. Radio Sc. Meeting, Boston'', MA, USA, July 2018.

[5] W. Hong and K. Sarabandi, “Platform embedded slot antenna backed by shielded parallel plate resonator”, ''IEEE Trans. on Antennas and Prop''. (2010), '''58''' (9): 2850-2857.

[6] N. Behdad and K. Sarabandi, “A wide-band slot antenna design employing a fictitious short circuit concept”, ''IEEE Trans. on Antennas and Prop''. (2005), '''53''' (1): 475-482.