Abstract

Volcanic pumice soils are widely distributed in many countries. Mechanical properties of those need to be characterized since seismic ground motions can cause serious hazards such as large-scale slope failures and long-distance debris flows. Since volcanic pumice generally retains extremely high porosity and has a sensitive structure, the natural soil structure is easily broken during sampling or transportation. Therefore, it is preferable to conduct in-situ tests without disturbing the original structure of the soil. In this study, an in-situ direct shear test device was developed, and in-situ cyclic direct shear tests were performed on volcanic pumice (Ta-d). This pumice soil is considered to be the main cause of slope failure in Atsuma, Hokkaido, Japan, due to Easten Iburi earthquake in 2018. Laboratory direct shear tests were also conducted using undisturbed sample taken from the site. The results revealed that soil structure significantly affects shear strength. To evaluate the mechanical behavior of such sensitive soils, it is crucial to use specimens with as less disturbed specimens as possible. The newly developed in-situ direct shear test device was used to determine the cyclic shear strength of sensitive volcanic pumice soils.

Abstract

Seismic liquefaction of loose saturated cohesionless soils is one of the most dangerous and catastrophic phenomena that involves a temporary loss of soil shear strength and stiffness as a consequence of increase pore pressure and reduced effective stress. Therefore, the evaluation of the excess pore pressure induced by shaking is important to predict the liquefaction behaviour of soils at a large scale. In this regard, the study provides the static and dynamic characterisation of a liquefiable sand. For this purpose, a laboratory testing programme, which included the execution of cyclic direct simple shear (CDSS) tests, was performed. The CDSS tests were carried out by means of the CDSS device at the Soil Dynamics and Geotechnical Engineering Laboratory of the University “Kore” of Enna (Italy). The device is designed to allow the soil specimen to be consolidated one-dimensionally and then sheared under constant volume conditions, which replicates the undrained shear condition of the soil specimen. The CDSS tests were conducted to evaluate the liquefaction resistance of the sand under several test conditions, i.e. initial relative density, vertical effective stress or cyclic stress ratios. Results of this study provide useful information for the geotechnical characterisation of the liquefiable sand to be used in shaking table tests at the Laboratory of Earthquake Engineering and Dynamic Analysis (L.E.D.A.) of the University “Kore” of Enna. The laboratory is equipped with a large biaxial laminar shear box for reduced-scale model tests developed to monitor liquefaction under two-dimensional shaking.