A numerical analysis of CPT-based tip resistance prediction during pile installation in clays

Abstract

Accurately predicting the installation resistance of offshore piles is important for their design and application. The cone penetration test (CPT) is the most widely used in situ sounding tests for pile drivability analysis and capacity prediction. While there are established empirical correlation methods to connect CPT data with pile installation resistance, the underlying mechanisms behind these correlations have yet to be fully understood. This study performs a numerical analysis to reveal such mechanisms and improve the correlations. The pile installation and cone penetration processes are modelled using a large-deformation finite-element method. For all analyses, a smooth cone and a smooth pile are simulated to quantify the relationship of tip resistance between the pile and CPT. The mechanisms of the two analogous penetration processes are visualized and compared through numerical modelling. As the cone advances, it pushes the soil at the cone tip into the far field. During the pile penetration process, soil heaving can be observed with the soil surface inside the pile moving above the mudline. The soil failure is localized at a small zone around the pile tip. The penetration resistances of pile are correlated to CPT data with the aid of numerical modelling and compared to existing CPT-based design guidelines. A discussion on the pile tip resistance correlated with cone tip resistance is included, and the value of the empirical coefficient for tip resistance kp is obtained.

Full Paper